Flat tappet and valve spring pressures.

Print Thread

Re: Flat tappet and valve spring pressures. [Re: fast68plymouth] #14251 02/09/05 11:14 PM 02/09/05 11:14 PM
Joined: Jan 2003 Posts: 5,894 Florida Locomotion master
Locomotion master Joined: Jan 2003 Posts: 5,894 Florida	Are those "regular" flat tappet cams or "mushroom" lifter cams? Wasn't there a metalurgy difference? I also recall something about "chilled iron lifters". That's an awful lot of spring pressure for a regular solid lifter.

Entire Thread
Subject	Posted By	Posted
Flat tappet and valve spring pressures.	HardcoreB	02/09/05 03:48 PM
Re: Flat tappet and valve spring pressures.	HardcoreB	02/09/05 05:07 PM
Re: Flat tappet and valve spring pressures.	atoetly	02/09/05 07:45 PM
Re: Flat tappet and valve spring pressures.	B1Ken	02/09/05 07:46 PM
Re: Flat tappet and valve spring pressures.	440Jim	02/09/05 09:39 PM
Re: Flat tappet and valve spring pressures.	fast68plymouth	02/10/05 02:02 AM
Re: Flat tappet and valve spring pressures.	Locomotion	02/10/05 03:14 AM
Re: Flat tappet and valve spring pressures.	BradH	02/10/05 03:33 AM
Re: Flat tappet and valve spring pressures.	MoparBilly	02/10/05 05:30 AM
Re: Flat tappet and valve spring pressures.	fast68plymouth	02/10/05 01:51 PM
Re: Flat tappet and valve spring pressures.	marvo451	02/10/05 01:58 PM
Re: Flat tappet and valve spring pressures.	Locomotion	02/10/05 02:00 PM
Re: Flat tappet and valve spring pressures.	atoetly	02/10/05 02:04 PM
Re: Flat tappet and valve spring pressures.	440Jim	02/10/05 02:57 PM
Re: Flat tappet and valve spring pressures.	HardcoreB	02/10/05 06:08 PM
Re: Flat tappet and valve spring pressures.	atoetly	02/10/05 07:45 PM
Re: Flat tappet and valve spring pressures.	Anonymous	02/12/05 01:47 AM
Re: Flat tappet and valve spring pressures.	blownEFI	02/12/05 02:09 AM
Re: Flat tappet and valve spring pressures.	jamesc	02/12/05 03:32 AM
Re: Flat tappet and valve spring pressures.	atoetly	02/12/05 10:22 PM
Re: Flat tappet and valve spring pressures.	HardcoreB	02/25/05 05:10 PM
Re: Flat tappet and valve spring pressures.	HardcoreB	02/25/05 05:13 PM
Re: Flat tappet and valve spring pressures.	BradH	02/25/05 05:17 PM
Re: Flat tappet and valve spring pressures.	nickmckinney	02/10/05 07:42 PM
Re: Flat tappet and valve spring pressures.	SuperStocker	02/09/05 09:12 PM
Re: Flat tappet and valve spring pressures.	atoetly	02/09/05 09:20 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To