Quote:

These are from an NOS deck lid molding and NOS 1/4 molding I have for my 71 Challenger.
The deck lid molding uses these clips on the two end holes only. The 1/4 moldings use (3) clips.
Try Jim at http://www.detroitmuscletechnologies.com/ - he made me some of the black foam washers/seals.


Rich



I have the tools for both these now (thanks). The whitish material - a guy sent me the washers on the studs of 70-71 Duster taillight bezels. Same material. This whitish, rubbery material is also used on the cuda fender gill studs. I found a GOOD functional equivalent material for this stuff; gum rubber sheets.

On that stud above with the whiteish seal, can you tell me how thick that is? Gum rubber comes in 1/16 and 1/8 but I can get 3/32" made.

The white ones Joe needs are easy. How many? Where are they used? ID? OD? Thickness (1/16", 3/32", 1/8"?)

www.DetroitMuscleTechnologies.com Mopar body and heater box restoration gaskets