Change valve seals w/out pulling heads?

Print Thread

Re: Change valve seals w/out pulling heads? [Re: buildanother] #1397824 03/06/13 01:42 PM 03/06/13 01:42 PM
Joined: Jan 2006 Posts: 234 SW FL D dodgedartgt OP enthusiast
dodgedartgt OP enthusiast D Joined: Jan 2006 Posts: 234 SW FL	Thnx for the replies everyone. I'm off to the parts store for the KD style compressor at the top of the list, under $20 in stock. This is a stock 361 with single springs, so I'm sure it will do the trick. Mike in FL

Entire Thread
Subject	Posted By	Posted
Change valve seals w/out pulling heads?	dodgedartgt	03/05/13 10:27 PM
Re: Change valve seals w/out pulling heads?	rftroy	03/05/13 10:41 PM
Re: Change valve seals w/out pulling heads?	Secret Chimp	03/05/13 10:44 PM
Re: Change valve seals w/out pulling heads?	70Cuda383	03/05/13 10:48 PM
Re: Change valve seals w/out pulling heads?	mickm	03/05/13 10:52 PM
Re: Change valve seals w/out pulling heads?	drew72	03/05/13 10:55 PM
Re: Change valve seals w/out pulling heads?	mickm	03/05/13 11:10 PM
Re: Change valve seals w/out pulling heads?	therocks	03/06/13 11:48 AM
Re: Change valve seals w/out pulling heads?	tboomer	03/06/13 12:49 PM
Re: Change valve seals w/out pulling heads?	Gavin	03/06/13 12:52 PM
Re: Change valve seals w/out pulling heads?	drew72	03/05/13 10:54 PM
Re: Change valve seals w/out pulling heads?	70Cuda383	03/06/13 02:12 PM
Re: Change valve seals w/out pulling heads?	drew72	03/06/13 02:25 PM
Re: Change valve seals w/out pulling heads?	scratchnfotraction	03/06/13 02:38 PM
Re: Change valve seals w/out pulling heads?	buildanother	03/06/13 03:03 PM
Re: Change valve seals w/out pulling heads?	dodgedartgt	03/06/13 05:42 PM
Re: Change valve seals w/out pulling heads?	therocks	03/06/13 07:35 PM
Re: Change valve seals w/out pulling heads?	KnuckleDuster	03/16/13 02:35 AM
Re: Change valve seals w/out pulling heads?	RapidRobert	03/16/13 04:40 PM
Re: Change valve seals w/out pulling heads?	67_Satellite	03/17/13 03:05 AM
Re: Change valve seals w/out pulling heads?	Secret Chimp	03/16/13 04:56 AM
Re: Change valve seals w/out pulling heads?	Commando1	03/16/13 03:18 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To