Quote: Bleeders go to the top,-- ALWAYS -- so the air can rise to the top and get pushed out.
What is the bore size of the front calipers? The rear calipers?
What is the bore size of the master cylinder?
What is the equalizer valve in the system? porportioning valve?
I dont have any information on the setup as this was done by the previous owner about 20 years ago. I was hoping someone might be able to identify the parts based on pics. I can search for part numbers, but would need direction on where to look.
The bleeders on the rear are kind of in the middle, but closer to the bottom than the top.
