Here is the cam I used to run...Full roller deal that I ran on the street and track! Now remember those numbers are with stock rockers, I run the higher lift Indy rockers....Ask me how much three sets of push rods, two sets of lash caps, and one set of valve guides cost $$$$$



Here is my new cam! This one is a full mechanical I run on street/strip.


Last edited by Dragula; 02/14/13 11:18 PM.
'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk