Quote:

---

I have a pair of Indy Aluminum cylinder heads on a 470" roller cammed engine. I cannot use the aluminum heads due to class rules, and have some Max Wedge Replacement heads CNCd waiting to go on. I'm planning on taking the heads to a swap meet this weekend to try and sell them to buy other parts for my pulling truck.

Should I keep the pushrods and the Indy rockers and run them a season on my iron heads? Or should I sell them with the heads and move onto purchasing some Hartlands or T&Ds. The motor was not ran hard before and seems in good shape. I will likely be turning this motor 72-7500 rpms(maybe more) in a 4wd pulling truck. I'm on a budget and hope the cylinder heads being sold will help me buy more axle parts, I need to regear both front and read diffs, plus spool rear, locker front, and some axle shafts. If I sell the Indy rockers, I will need to put money into some more rockers and pushrods. Engine currently has a roller cam in it, the specs are not in front of me.

Thanks guys.
Michael

---

You do know that Indy makes cast iron heads also right???
Maybe check out some of the Indy dealers for a possible trade-in value for your MW heads
Give Nick a call at www.compu-flow.com
At least all your other parts will work
Gus