440 Source Parts Quality

Print Thread

Re: 440 Source Parts Quality [Re: AndyF] #1362868 01/02/13 02:08 AM 01/02/13 02:08 AM
Joined: Mar 2003 Posts: 9,108 Rogue River, OR Jeremiah master
Jeremiah master Joined: Mar 2003 Posts: 9,108 Rogue River, OR	Their aluminum main caps leave a bit to be desired. One hole was off and the thrust bearing surface is too wide for use with my 1975 400 blocks. Nice guys on the phone when I called to ask them about the above issues.

Entire Thread
Subject	Posted By	Posted
440 Source Parts Quality	patosmith	01/01/13 10:59 PM
Re: 440 Source Parts Quality	slippery440	01/01/13 11:05 PM
Re: 440 Source Parts Quality	Big Squeeze	01/01/13 11:15 PM
Re: 440 Source Parts Quality	patosmith	01/01/13 11:19 PM
Re: 440 Source Parts Quality	slippery440	01/01/13 11:28 PM
Re: 440 Source Parts Quality	rebel	01/01/13 11:48 PM
Re: 440 Source Parts Quality	VernMotor	01/01/13 11:49 PM
Re: 440 Source Parts Quality	MR_P_BODY	01/01/13 11:51 PM
Re: 440 Source Parts Quality	tubtar	01/01/13 11:54 PM
Re: 440 Source Parts Quality	MR_P_BODY	01/02/13 12:05 AM
Re: 440 Source Parts Quality	Dartin	01/02/13 12:13 AM
Re: 440 Source Parts Quality	VernMotor	01/02/13 12:22 AM
Re: 440 Source Parts Quality	RodStRace	01/02/13 12:26 AM
Re: 440 Source Parts Quality	Old School	01/02/13 12:36 AM
Re: 440 Source Parts Quality	JohnRR	01/02/13 01:29 AM
Re: 440 Source Parts Quality	Chris2581	01/02/13 12:45 AM
Re: 440 Source Parts Quality	StealthWedge67	01/03/13 07:03 AM
Re: 440 Source Parts Quality	julian2007	01/03/13 08:39 PM
Re: 440 Source Parts Quality	savoyracer	01/02/13 01:33 AM
Re: 440 Source Parts Quality	CSK	01/02/13 01:39 AM
Re: 440 Source Parts Quality	tubtar	01/02/13 03:29 AM
Re: 440 Source Parts Quality	383man	01/02/13 04:37 AM
Re: 440 Source Parts Quality	pittsburghracer	01/02/13 01:47 AM
Re: 440 Source Parts Quality	493_DART	01/02/13 02:42 AM
Re: 440 Source Parts Quality	AndyF	01/02/13 05:01 AM
Re: 440 Source Parts Quality	Jeremiah	01/02/13 06:08 AM
Re: 440 Source Parts Quality	rowin4	01/02/13 07:07 AM
Re: 440 Source Parts Quality	mopardamo	01/02/13 07:42 AM
Re: 440 Source Parts Quality	451Mopar	01/02/13 08:51 AM
Re: 440 Source Parts Quality	bobs66440	01/02/13 11:34 AM
Re: 440 Source Parts Quality	70VcodeCoronetRT	01/02/13 03:27 PM
Re: 440 Source Parts Quality	maximum entropy	01/02/13 05:42 PM
Re: 440 Source Parts Quality	therocks	01/02/13 07:36 PM
Re: 440 Source Parts Quality	Twostick	01/03/13 03:50 AM
Re: 440 Source Parts Quality	Eric	01/03/13 04:01 AM
Re: 440 Source Parts Quality	mopartoby	01/03/13 04:02 AM
Re: 440 Source Parts Quality	MAXEDWEDGE	01/02/13 05:39 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To