Quote:

the tms/tsm kit doesn't line up the rear calipers properly to bleed them on the car. not sure if that is what you are using, but you have to pull them off the car to get them to line up the bleeders to get the air out using the eldo calipers.




Yep I found some wood scraps that I wedged between the piston and the outside of the caliper so I could pressure bleed them with the bleeder in the right position. Then I did some gravity bleeding. Then some more. lol. I may have had a goofy bleeder on one side as well.

Anyways, I'll report back once I get the new calipers installed.


If you ever find yourself in a fair fight, your tactics suck.