Quote:

Quote:

Looks nice. I would ditch that intake though..Only intake with worse distribution was M1 single 4 barrel...




I may get one of the Stage V ones later(when the budget allows), but for now I'll run this one.
Dan still has to mill out the center dividers (Vanke mod) and open up the throttle bore area for the 750 carbs.
If you look close you can where the top is marked where it will be milled out.




Yeah, can't see it in thew pics, but that will really help...


'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk