Priming the oil system on a new motor.

Print Thread

Re: Priming the oil system on a new motor. [Re: Cab_Burge] #1292030 08/28/12 10:45 AM 08/28/12 10:45 AM
Joined: Oct 2003 Posts: 7,506 Az Crizila OP master
Crizila OP master Joined: Oct 2003 Posts: 7,506 Az	Quote: Quote: Walked out of my garage in my underware after disgarding my shoes and pants. Naturally I was standing on the oil filter side ( small block ) when I fired up the drill. I did remember to screw in a oil press gauge and I watched the needle not move as I filled up my shoes. Murphy loves messin with drag racers Lots of other ways to mess up, I hope you don't find out about any more of them Thanks. My age is starting to scare me. Fastest 300

Entire Thread
Subject	Posted By	Posted
Priming the oil system on a new motor.	Crizila	08/27/12 02:34 AM
Re: Priming the oil system on a new motor.	Chargerfan68	08/27/12 02:37 AM
Re: Priming the oil system on a new motor.	Crizila	08/27/12 02:47 AM
Re: Priming the oil system on a new motor.	Chargerfan68	08/27/12 02:51 AM
Re: Priming the oil system on a new motor.	MR_P_BODY	08/27/12 03:01 AM
Re: Priming the oil system on a new motor.	Labratt	08/28/12 04:00 AM
Re: Priming the oil system on a new motor.	Cab_Burge	08/28/12 05:44 AM
Re: Priming the oil system on a new motor.	Crizila	08/28/12 02:45 PM
Re: Priming the oil system on a new motor.	'72CudaRacer	08/27/12 03:43 AM
Re: Priming the oil system on a new motor.	70Cuda383	08/27/12 12:05 PM
Re: Priming the oil system on a new motor.	fasteddie	08/29/12 03:57 AM

Hop To