Priming the oil system on a new motor.

Print Thread

Re: Priming the oil system on a new motor. [Re: Chargerfan68] #1292023 08/26/12 10:47 PM 08/26/12 10:47 PM
Joined: Oct 2003 Posts: 7,506 Az Crizila OP master
Crizila OP master Joined: Oct 2003 Posts: 7,506 Az	Walked out of my garage in my underware after disgarding my shoes and pants. Naturally I was standing on the oil filter side ( small block ) when I fired up the drill. I did remember to screw in a oil press gauge and I watched the needle not move as I filled up my shoes. Fastest 300

Entire Thread
Subject	Posted By	Posted
Priming the oil system on a new motor.	Crizila	08/27/12 02:34 AM
Re: Priming the oil system on a new motor.	Chargerfan68	08/27/12 02:37 AM
Re: Priming the oil system on a new motor.	Crizila	08/27/12 02:47 AM
Re: Priming the oil system on a new motor.	Chargerfan68	08/27/12 02:51 AM
Re: Priming the oil system on a new motor.	MR_P_BODY	08/27/12 03:01 AM
Re: Priming the oil system on a new motor.	Labratt	08/28/12 04:00 AM
Re: Priming the oil system on a new motor.	Cab_Burge	08/28/12 05:44 AM
Re: Priming the oil system on a new motor.	Crizila	08/28/12 02:45 PM
Re: Priming the oil system on a new motor.	'72CudaRacer	08/27/12 03:43 AM
Re: Priming the oil system on a new motor.	70Cuda383	08/27/12 12:05 PM
Re: Priming the oil system on a new motor.	fasteddie	08/29/12 03:57 AM

Hop To