Quote: Once you get the angles and ratios correct, the stock pedal will work... you were pulling at such a sever angle before it was WAY over loaded... you were pulling better than twice the effort before until it got to 90*
Mike,I also noticed that the cable coming out of the firewall seems to be at an angle VS coming straight out then bendin upwards.What would keep the cable housing straight before curving??The broken strands at the firewall seems to be what kept it from coming back to idle
You need a new inner cable for sure (or the Locar) but sometimes you have to run a longer housing so its pre-loaded to keep a nice radius... once you break 1 strand in the inner cable it has/should be replaced
