Quote: I am having issues with my carb linkage.I can't seem to get full throttle and the stock style cables I have tried don't have enough pull for full throttle,and,,they start unwinding/breaking strands of the cable.I have the enderly linkage kit and it does take quite a bit of effort to open the 2 SV1 carbs from an idle. Pictues and ideas would be great!!
Your pulling almost 180* to the lower arm... that will be about the hardest to pull... move the lower arm upward some (closer to 90*) then you will have to change the ratio going up to the carbs(faster ratio)... move the up rod closer to the pivot
