Acceptable rocker arm to pushrod clearance at max lift

Print Thread

Re: Acceptable rocker arm to pushrod clearance [Re: mshred] #1206969 03/31/12 04:54 PM 03/31/12 04:54 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	Quote: Hey guys, I should have been clearer sorry. DOH This clearance that I am measuring is at max lift, so the rocker is at its maximum arc. The range of motion throughout the lift range is perfectly fine, it was at this max lift that I was concerned about since thats when it gets close. Also, the pushrod and valvegear is that best compromise right now for max lift and best geometry. Both intakes and exhaust are set so that 2-3 threads are sticking out the top of the adjuster screw You dont care whats sticking out the top... you need to know how much is on the underside of the rocker... but you might be grinding on the rockers EDIT also are you talking the cup of the PR is close... if so just grind the OD of the cup down Last edited by MR_P_BODY; 03/31/12 04:56 PM.

Entire Thread
Subject	Posted By	Posted
Acceptable rocker arm to pushrod clearance at max lift	mshred	03/31/12 06:45 PM
Re: Acceptable rocker arm to pushrod clearance	HPMike	03/31/12 06:54 PM
Re: Acceptable rocker arm to pushrod clearance	1_WILD_RT	03/31/12 07:01 PM
Re: Acceptable rocker arm to pushrod clearance	mshred	03/31/12 07:19 PM
Re: Acceptable rocker arm to pushrod clearance	MR_P_BODY	03/31/12 08:54 PM
Re: Acceptable rocker arm to pushrod clearance	mshred	03/31/12 09:06 PM
Re: Acceptable rocker arm to pushrod clearance	MR_P_BODY	03/31/12 09:28 PM
Re: Acceptable rocker arm to pushrod clearance	mshred	03/31/12 10:16 PM
Re: Acceptable rocker arm to pushrod clearance	MR_P_BODY	03/31/12 10:20 PM
Re: Acceptable rocker arm to pushrod clearance	mshred	03/31/12 10:33 PM

Hop To