Acceptable rocker arm to pushrod clearance at max lift

Print Thread

Re: Acceptable rocker arm to pushrod clearance [Re: HPMike] #1206967 03/31/12 03:01 PM 03/31/12 03:01 PM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	Quote: Is it possible to post a pic?? I might be misreading the post, but it almost sounds like you have the adjsuter too far backed out of the rocker arm.. MB Sounds like another turn out on the adjuster & a shorter pushrod... Pay attention to any oil passage but also check all clearances through a full motion of the valve.. "The Armies of our ancestors were lucky, in that they were not trailed by a second army of pencil pushers."

Entire Thread
Subject	Posted By	Posted
Acceptable rocker arm to pushrod clearance at max lift	mshred	03/31/12 06:45 PM
Re: Acceptable rocker arm to pushrod clearance	HPMike	03/31/12 06:54 PM
Re: Acceptable rocker arm to pushrod clearance	1_WILD_RT	03/31/12 07:01 PM
Re: Acceptable rocker arm to pushrod clearance	mshred	03/31/12 07:19 PM
Re: Acceptable rocker arm to pushrod clearance	MR_P_BODY	03/31/12 08:54 PM
Re: Acceptable rocker arm to pushrod clearance	mshred	03/31/12 09:06 PM
Re: Acceptable rocker arm to pushrod clearance	MR_P_BODY	03/31/12 09:28 PM
Re: Acceptable rocker arm to pushrod clearance	mshred	03/31/12 10:16 PM
Re: Acceptable rocker arm to pushrod clearance	MR_P_BODY	03/31/12 10:20 PM
Re: Acceptable rocker arm to pushrod clearance	mshred	03/31/12 10:33 PM

Hop To