Quote:

---

Is it necessary to go to the bare metal, use a etching primer and then the Evercoat body filler?

I have received conflicting information from several sources and wanted to run this by the good members of moparts.

I have heard that evercoat can only go over bare metal, and have also heard it can go over sanded/prepped primer/paint.

I have glazing putty for the final filler.

Thanks in advance!

---

Do not use etching primer under filler. Use epoxy primer.

Any shop that actually cares about their reputation would not apply filler over bare metal.

What type of glazing putty are you planning on using? I'm hoping it's something that comes with a hardener.Anything without hardener is trash and should not be used if you are after longlasting results.