MSD Minimum Cranking Supply Voltage

Print Thread

Re: MSD Minimum Cranking Supply Voltage [Re: YO7_A66] #1196846 04/10/12 03:15 AM 04/10/12 03:15 AM
Joined: Mar 2008 Posts: 38 Sharpsburg, GA R rusthole member
rusthole member R Joined: Mar 2008 Posts: 38 Sharpsburg, GA	Did you ever get a response for the minimum crank voltage? I just installed an MSD 6AL2, and it is dead- no spark. My batt voltage is 12 but my voltage to the little red wire, after it goes through the ignition switch is 10.5. I have no power to the coil

Entire Thread
Subject	Posted By	Posted
MSD Minimum Cranking Supply Voltage	YO7_A66	03/14/12 03:05 PM
Re: MSD Minimum Cranking Supply Voltage	lewtot184	03/14/12 05:33 PM
Re: MSD Minimum Cranking Supply Voltage	YO7_A66	03/14/12 05:56 PM
Re: MSD Minimum Cranking Supply Voltage	dogdays	03/15/12 02:55 PM
Re: MSD Minimum Cranking Supply Voltage	YO7_A66	03/15/12 03:46 PM
Re: MSD Minimum Cranking Supply Voltage	Anonymous	03/16/12 01:25 AM
Re: MSD Minimum Cranking Supply Voltage	ahy	03/16/12 02:48 AM
Re: MSD Minimum Cranking Supply Voltage	Evil Spirit	03/16/12 07:48 AM
Re: MSD Minimum Cranking Supply Voltage	YO7_A66	03/16/12 12:58 PM
Re: MSD Minimum Cranking Supply Voltage	rusthole	04/10/12 07:15 AM
Re: MSD Minimum Cranking Supply Voltage	YO7_A66	04/10/12 11:39 AM
Re: MSD Minimum Cranking Supply Voltage	YO7_A66	04/10/12 04:29 PM
Re: MSD Minimum Cranking Supply Voltage	65cuda	07/25/14 06:55 PM
Re: MSD Minimum Cranking Supply Voltage	therocks	07/25/14 08:03 PM
Re: MSD Minimum Cranking Supply Voltage	65cuda	07/27/14 08:40 PM
Re: MSD Minimum Cranking Supply Voltage	therocks	07/27/14 09:41 PM
Re: MSD Minimum Cranking Supply Voltage	65cuda	07/27/14 10:08 PM
Re: MSD Minimum Cranking Supply Voltage	therocks	07/28/14 02:35 AM

Hop To