MSD Minimum Cranking Supply Voltage

Print Thread

Re: MSD Minimum Cranking Supply Voltage [Re: YO7_A66] #1196844 03/16/12 03:48 AM 03/16/12 03:48 AM
Joined: Jan 2005 Posts: 3,699 Newport, Mi Evil Spirit master
Evil Spirit master Joined: Jan 2005 Posts: 3,699 Newport, Mi	I run a MSD 6AL and if it will crank, it will fire. I've had it start with 10V showing on the gauge. The digital boxes are another story - they seem to need 12V minimum to fire. Free advice and worth every penny... Factory trained Slinky rewinder.........

Entire Thread
Subject	Posted By	Posted
MSD Minimum Cranking Supply Voltage	YO7_A66	03/14/12 03:05 PM
Re: MSD Minimum Cranking Supply Voltage	lewtot184	03/14/12 05:33 PM
Re: MSD Minimum Cranking Supply Voltage	YO7_A66	03/14/12 05:56 PM
Re: MSD Minimum Cranking Supply Voltage	dogdays	03/15/12 02:55 PM
Re: MSD Minimum Cranking Supply Voltage	YO7_A66	03/15/12 03:46 PM
Re: MSD Minimum Cranking Supply Voltage	Anonymous	03/16/12 01:25 AM
Re: MSD Minimum Cranking Supply Voltage	ahy	03/16/12 02:48 AM
Re: MSD Minimum Cranking Supply Voltage	Evil Spirit	03/16/12 07:48 AM
Re: MSD Minimum Cranking Supply Voltage	YO7_A66	03/16/12 12:58 PM
Re: MSD Minimum Cranking Supply Voltage	rusthole	04/10/12 07:15 AM
Re: MSD Minimum Cranking Supply Voltage	YO7_A66	04/10/12 11:39 AM
Re: MSD Minimum Cranking Supply Voltage	YO7_A66	04/10/12 04:29 PM
Re: MSD Minimum Cranking Supply Voltage	65cuda	07/25/14 06:55 PM
Re: MSD Minimum Cranking Supply Voltage	therocks	07/25/14 08:03 PM
Re: MSD Minimum Cranking Supply Voltage	65cuda	07/27/14 08:40 PM
Re: MSD Minimum Cranking Supply Voltage	therocks	07/27/14 09:41 PM
Re: MSD Minimum Cranking Supply Voltage	65cuda	07/27/14 10:08 PM
Re: MSD Minimum Cranking Supply Voltage	therocks	07/28/14 02:35 AM

Hop To