Quote:

A worn bore and a backyard hone'n're-ring job, I would be using plain old cast rings, not moly. Moly coated rings seal better and break in quicker but they are not as forgiving on a worn bore as cast rings. Hastings cast rings are a good choice for these types of builds IMO.



100%

most 85 318 with roller cam #302 heads had the moly rings stock.

they do well on bore wear and tappor,MY 300,00 mile 88 is still in specs for a rering with used pistons.

i will slap a set of stock cast rings in wafter a dingle ball hone job to clean them up some.

if its in specs its in specs for a re-ring

i may not get another 300,00 but another 150,000 will work for the price.