cast 400 or 383 steel crank - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer cast 400 or 383 steel crank

Print Thread

Re: cast 400 or 383 steel crank [Re: westdart68] #1138199 12/17/11 07:34 PM 12/17/11 07:34 PM
Joined: Aug 2003 Posts: 4,384 Madison Wi NTOLERANCE master
NTOLERANCE master Joined: Aug 2003 Posts: 4,384 Madison Wi	400 pistons are heavier than 383 pistons. It will vibrate... I used to care but....... things have changed

Entire Thread
Subject	Posted By	Posted
cast 400 or 383 steel crank	westdart68	12/17/11 11:11 PM
Re: cast 400 or 383 steel crank	NTOLERANCE	12/17/11 11:34 PM
Re: cast 400 or 383 steel crank	John_Kunkel	12/18/11 12:53 AM
Re: cast 400 or 383 steel crank	383man	12/18/11 01:22 AM
Re: cast 400 or 383 steel crank	RapidRobert	12/18/11 05:41 AM
Re: cast 400 or 383 steel crank	LaRoy Engines	12/18/11 06:58 AM
Re: cast 400 or 383 steel crank	JohnRR	12/18/11 05:02 PM
Re: cast 400 or 383 steel crank	John_Kunkel	12/18/11 09:52 PM
Re: cast 400 or 383 steel crank	JohnRR	12/18/11 10:02 PM
Re: cast 400 or 383 steel crank	John_Kunkel	12/19/11 01:07 AM
Re: cast 400 or 383 steel crank	JohnRR	12/19/11 03:51 PM
Re: cast 400 or 383 steel crank	dogdays	12/19/11 09:59 PM
Re: cast 400 or 383 steel crank	JAMESDART	12/20/11 04:03 PM
Re: cast 400 or 383 steel crank	dodgeboy11	12/20/11 04:26 PM
Re: cast 400 or 383 steel crank	DartGTS	12/20/11 05:49 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1