cast 400 or 383 steel crank - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer cast 400 or 383 steel crank

Print Thread

Re: cast 400 or 383 steel crank [Re: JohnRR] #1138207 12/18/11 09:07 PM 12/18/11 09:07 PM
Joined: Jan 2003 Posts: 25,757 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,757 Rio Linda, CA	My argument is to why the forged 383 and 400 cranks are an interchange in original form. The INTERNET, the MISinformation superhighway

Entire Thread
Subject	Posted By	Posted
cast 400 or 383 steel crank	westdart68	12/17/11 11:11 PM
Re: cast 400 or 383 steel crank	NTOLERANCE	12/17/11 11:34 PM
Re: cast 400 or 383 steel crank	John_Kunkel	12/18/11 12:53 AM
Re: cast 400 or 383 steel crank	383man	12/18/11 01:22 AM
Re: cast 400 or 383 steel crank	RapidRobert	12/18/11 05:41 AM
Re: cast 400 or 383 steel crank	LaRoy Engines	12/18/11 06:58 AM
Re: cast 400 or 383 steel crank	JohnRR	12/18/11 05:02 PM
Re: cast 400 or 383 steel crank	John_Kunkel	12/18/11 09:52 PM
Re: cast 400 or 383 steel crank	JohnRR	12/18/11 10:02 PM
Re: cast 400 or 383 steel crank	John_Kunkel	12/19/11 01:07 AM
Re: cast 400 or 383 steel crank	JohnRR	12/19/11 03:51 PM
Re: cast 400 or 383 steel crank	dogdays	12/19/11 09:59 PM
Re: cast 400 or 383 steel crank	JAMESDART	12/20/11 04:03 PM
Re: cast 400 or 383 steel crank	dodgeboy11	12/20/11 04:26 PM
Re: cast 400 or 383 steel crank	DartGTS	12/20/11 05:49 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1