Quote:

I was just looking at 440Source for the distributor driveshaft and found something Disturbing. They are selling in Their own words "Heavy Duty pinned Intermediate shaft - Steel gear (needs slight grinding of hex flats to fit pump) $25" "Needs Slight Grinding of the Hex Flats to fit the Pump" That doesn't sound right to me !!! Wouldn't the shaft be case hardened and would not grinding ruin the hardening ???




Or what if too much is "ground"??

Ever grind on an allen wrench to get it to fit a worn out, stuck in socket head bolt? Yeah hardly ever works. Take out too much and you lose the shaft and the pump.

440 source has plenty of machining capabilities now, why not fix it?

Must be "metric sized"


I used to care but....... things have changed