Quote:

You guys are right on the reliability issues, it was kinda wishful thinking on my part. I wanted to run the A&A Transmissions' 440 crossram setup, but they said it would only work w/ stock valve covers. The stock-type rockers were the only ones that I knew of that would work. Anybody know of any other rocker that work in this case? Aain, thanks to all for y'alls input.



I ran 440 Source rockers under a stock cover so I imagine most of the aluminum rollers would work. I did have to modify them, but it was easy. I cut the baffles out of the cover, moved the baffles up as tight as I could then tacked them back into place. Gave me enough clearance to easily run them without issues.

Darrah Heath