pcv or evac for a turbo engine

Print Thread

Re: pcv or evac for a turbo engine [Re: Runnoft] #1068967 09/04/11 07:14 PM 09/04/11 07:14 PM
Joined: Aug 2007 Posts: 475 HEMPSTEAD TX C CUUDAK mopar
CUUDAK mopar C Joined: Aug 2007 Posts: 475 HEMPSTEAD TX	Quote: If you can't run a vacuum pump (i.e. a street car), I would run a AN-10 vent line from each valve cover to two puke cans. One for each bank. No PCV. No Evac. That may work but if there is any pressure in the crankcase it could(more likely will) blow out every gasket in the engine. I will be using a setup like I had on my 8 second Falcon but only on one of the valvecovers and a filtered vent on the other valvecover like this, http://cgi.ebay.com/ebaymotors/EVAC-SYST...=item1e66944596 My SRT8 CHARGER "Four door bore" <img src="/ubbthreads/images/graemlins/smile.gif" alt="" />

Entire Thread
Subject	Posted By	Posted
pcv or evac for a turbo engine	all spooled up	09/04/11 03:56 PM
Re: pcv or evac for a turbo engine	Runnoft	09/04/11 04:16 PM
Re: pcv or evac for a turbo engine	CUUDAK	09/04/11 11:14 PM
Re: pcv or evac for a turbo engine	Revhard	09/05/11 07:20 AM
Re: pcv or evac for a turbo engine	all spooled up	09/05/11 04:20 PM
Re: pcv or evac for a turbo engine	70Cuda383	09/05/11 05:16 PM
Re: pcv or evac for a turbo engine	Revhard	09/06/11 05:52 AM
Re: pcv or evac for a turbo engine	CUUDAK	09/06/11 02:52 PM

Hop To