pcv or evac for a turbo engine

Print Thread

Re: pcv or evac for a turbo engine [Re: all spooled up] #1068966 09/04/11 12:16 PM 09/04/11 12:16 PM
Joined: May 2005 Posts: 54 VA Beach, VA R Runnoft member
Runnoft member R Joined: May 2005 Posts: 54 VA Beach, VA	If you can't run a vacuum pump (i.e. a street car), I would run a AN-10 vent line from each valve cover to two puke cans. One for each bank. No PCV. No Evac. Cruiser: 66 Dodge Coronet 500, Indy SR 440, Gen 7 Accel EFI = 11.38 @ 116. Racing: Brand X, X275 Procharged Smallblock on M1, Leafsprings, Holley EFI = 4.30 @ 168

Entire Thread
Subject	Posted By	Posted
pcv or evac for a turbo engine	all spooled up	09/04/11 03:56 PM
Re: pcv or evac for a turbo engine	Runnoft	09/04/11 04:16 PM
Re: pcv or evac for a turbo engine	CUUDAK	09/04/11 11:14 PM
Re: pcv or evac for a turbo engine	Revhard	09/05/11 07:20 AM
Re: pcv or evac for a turbo engine	all spooled up	09/05/11 04:20 PM
Re: pcv or evac for a turbo engine	70Cuda383	09/05/11 05:16 PM
Re: pcv or evac for a turbo engine	Revhard	09/06/11 05:52 AM
Re: pcv or evac for a turbo engine	CUUDAK	09/06/11 02:52 PM

Hop To