Anyone using HS rockers on Indy EZ heads - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Anyone using HS rockers on Indy EZ heads

Print Thread

Anyone using HS rockers on Indy EZ heads #989006 05/09/11 08:31 PM 05/09/11 08:31 PM
Joined: Oct 2005 Posts: 8,874 Ontario, Canada S Stanton OP Don't question me!
Stanton OP Don't question me! S Joined: Oct 2005 Posts: 8,874 Ontario, Canada	Just wondering how well they mate up to the valve tip.

Re: Anyone using HS rockers on Indy EZ heads [Re: Stanton] #989007 05/09/11 08:33 PM 05/09/11 08:33 PM
Joined: Aug 2008 Posts: 941 Texas, USA ChrgrCuda super stock
ChrgrCuda super stock Joined: Aug 2008 Posts: 941 Texas, USA	Checked mine out on the geometry, looked like everything was in order.... 68 Cuda Notchback [Email]10.86@120[/Email] 69 Charger R/T 440/505 2009 Challenger SRT8

Re: Anyone using HS rockers on Indy EZ heads [Re: Stanton] #989008 05/09/11 09:17 PM 05/09/11 09:17 PM
Joined: Nov 2004 Posts: 3,544 Syracuse,NY CompWedgeEngines master
CompWedgeEngines master Joined: Nov 2004 Posts: 3,544 Syracuse,NY	They typically fit very well on STD EZ's, and SR's, Need different for big EZ. Otherwise they are a good rocker for the EZ family. RIP Monte Smith Your work is a reflection of yourself, autograph it with quality. WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Re: Anyone using HS rockers on Indy EZ heads [Re: Stanton] #989009 05/10/11 12:47 AM 05/10/11 12:47 AM
Joined: Mar 2007 Posts: 314 Manitoba, Canada B Big Wedge enthusiast
Big Wedge enthusiast B Joined: Mar 2007 Posts: 314 Manitoba, Canada	My machinist added lash caps to get a better sweep of the roller tip. Here is the first picture. These are 1.5 ratio Harland Sharps. Gart 6625842-IM001650.JPG (96 downloads)

Re: Anyone using HS rockers on Indy EZ heads [Re: Big Wedge] #989010 05/10/11 12:48 AM 05/10/11 12:48 AM
Joined: Mar 2007 Posts: 314 Manitoba, Canada B Big Wedge enthusiast
Big Wedge enthusiast B Joined: Mar 2007 Posts: 314 Manitoba, Canada	Here is the second picture. Garth 6625844-IM001651.JPG (129 downloads)

Re: Anyone using HS rockers on Indy EZ heads [Re: Stanton] #989011 05/10/11 12:53 AM 05/10/11 12:53 AM
Joined: Dec 2008 Posts: 184 Central Coast P Plumcrazyracing member
Plumcrazyracing member P Joined: Dec 2008 Posts: 184 Central Coast	Stanton- The Harland Sharps fit very well on the EZ's as far as alignment with the valve stem. I have the CnC'd 295's. However, I did have to have the pushrod holes in the head opened up to clear the pushrod (1.5 ratio) with a .620 lift cam and 3/8 pushrod. I think I would have been okay had I went with offset Intake rockers. The pushrods rubbed the intake runner. They did not bind but definately made solid contact with the runner. When I had the holes opened up the porosity in the casting allowed oil to seep through the intake runner. I ended up using silicon to embed the aluminum and have not had any problems. Food for thought! I was very impressed with the HS rockers! Steve

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1