|
Re: lug nut , wheel stud problem
[Re: Pacnorthcuda]
#950246
03/13/11 11:05 PM
03/13/11 11:05 PM
|
Joined: Nov 2003
Posts: 36,041 Lincoln Nebraska
RapidRobert
Circle Track
|
Circle Track
Joined: Nov 2003
Posts: 36,041
Lincoln Nebraska
|
What Pac said & spray the bit w some liquid which'll make it drill much faster
live every 24 hour block of time like it's your last day on earth
|
|
|
Re: lug nut , wheel stud problem
[Re: stumpy]
#950248
03/13/11 11:54 PM
03/13/11 11:54 PM
|
Joined: Jan 2003
Posts: 18,424 UPPER MICHIGAN, MARQUETTE COUN...
NITROUSN
I Live Here
|
I Live Here
Joined: Jan 2003
Posts: 18,424
UPPER MICHIGAN, MARQUETTE COUN...
|
Quote:
If it is on the front and has drum brakes you can remove wheel tire and drum as one piece and cut the studs off from the back of the drum.
He has wheel adaptors bolted on so nothing is comming off.
Air saw it length wise and you can split it open with a chisel.
|
|
|
Re: lug nut , wheel stud problem
[Re: NITROUSN]
#950250
03/14/11 01:17 PM
03/14/11 01:17 PM
|
Joined: Jan 2003
Posts: 32,947 Grand Prairie,Texas
stumpy
I Win
|
I Win
Joined: Jan 2003
Posts: 32,947
Grand Prairie,Texas
|
Quote:
Quote:
If it is on the front and has drum brakes you can remove wheel tire and drum as one piece and cut the studs off from the back of the drum.
He has wheel adaptors bolted on so nothing is comming off.
Air saw it length wise and you can split it open with a chisel.
If he grinds the factory studs off the back of the drum then he can work on the adapter more easily. The adapter won't stop him from removing the drum from the spindle.
|
|
|
Re: lug nut , wheel stud problem
[Re: stumpy]
#950251
03/14/11 01:56 PM
03/14/11 01:56 PM
|
Joined: Jan 2003
Posts: 75,050 U.S.S.A.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,050
U.S.S.A.
|
Quote:
Quote:
Quote:
If it is on the front and has drum brakes you can remove wheel tire and drum as one piece and cut the studs off from the back of the drum.
He has wheel adaptors bolted on so nothing is comming off.
Air saw it length wise and you can split it open with a chisel.
If he grinds the factory studs off the back of the drum then he can work on the adapter more easily. The adapter won't stop him from removing the drum from the spindle.
, if it's the rear he is SOL , but notthe front.
|
|
|
|
|
|