Topic Options
#950244 - 03/13/11 07:17 PM lug nut , wheel stud problem
b5a12bee Offline
mopar

Registered: 12/30/03
Posts: 459
Loc: KY
Looks like the previous owner put on the wrong lugs for the studs. Now three of them are stuck on the stud and the stud will just spin.It has wheel adapters on it, small to big lug pattern.Any ideas how to get the lugs off without using a tourch? There not enough room to get a saw on it. Thanks

Top
#950245 - 03/13/11 07:22 PM Re: lug nut , wheel stud problem [Re: b5a12bee]
Pacnorthcuda Offline
I Live Here

Registered: 11/19/07
Posts: 18916
Loc: Kirkland, Washington
I assume youve tried an Impact right? And these are not LH thread right?
Drill them out by holding the lug steady with a socket, while drilling down the center of the socket. (Hold socket with vise grips).
Gonna take some good drill bits and lotsa patience.

Top
#950246 - 03/13/11 09:05 PM Re: lug nut , wheel stud problem [Re: Pacnorthcuda]
RapidRobert Offline
Circle Track

Registered: 11/20/03
Posts: 33374
Loc: Lincoln Nebraska
What Pac said & spray the bit w some liquid which'll make it drill much faster
_________________________
live every 24 hour block of time like it's your last day on earth

Top
#950247 - 03/13/11 09:32 PM Re: lug nut , wheel stud problem [Re: RapidRobert]
stumpy Offline


Registered: 01/19/03
Posts: 29005
Loc: Grand Prairie,Texas
If it is on the front and has drum brakes you can remove wheel tire and drum as one piece and cut the studs off from the back of the drum.

Top
#950248 - 03/13/11 09:54 PM Re: lug nut , wheel stud problem [Re: stumpy]
NITROUSN Offline
I Live Here

Registered: 01/20/03
Posts: 15930
Loc: UPPER MICHIGAN, MARQUETTE COUN...
Quote:

If it is on the front and has drum brakes you can remove wheel tire and drum as one piece and cut the studs off from the back of the drum.




He has wheel adaptors bolted on so nothing is comming off.

Air saw it length wise and you can split it open with a chisel.

Top
#950249 - 03/13/11 10:57 PM Re: lug nut , wheel stud problem [Re: NITROUSN]
DartGTS Offline
super street

Registered: 01/21/03
Posts: 393
Loc: ILLinois
Hello:
Had the same situation on my sons road runner, junk Cragers with adapters and striped lug nuts.
Nothing fancy or mysterious just used the "Hot Wrench."
Maynard
_________________________
"Go fast or go home 1967 Dart GTS,2005 "A Body Orginal" 1st Place Mopar Nats /2002 PT Cruiser / 2004 Ram 1500 Hemi/ Web Master http://dartstechsite.x10.mx

Top
#950250 - 03/14/11 11:17 AM Re: lug nut , wheel stud problem [Re: NITROUSN]
stumpy Offline


Registered: 01/19/03
Posts: 29005
Loc: Grand Prairie,Texas
Quote:

Quote:

If it is on the front and has drum brakes you can remove wheel tire and drum as one piece and cut the studs off from the back of the drum.




He has wheel adaptors bolted on so nothing is comming off.

Air saw it length wise and you can split it open with a chisel.




If he grinds the factory studs off the back of the drum then he can work on the adapter more easily. The adapter won't stop him from removing the drum from the spindle.

Top
#950251 - 03/14/11 11:56 AM Re: lug nut , wheel stud problem [Re: stumpy]
JohnRR Offline
I Win

Registered: 01/20/03
Posts: 73496
Loc: U.S.S.A.
Quote:

Quote:

Quote:

If it is on the front and has drum brakes you can remove wheel tire and drum as one piece and cut the studs off from the back of the drum.




He has wheel adaptors bolted on so nothing is comming off.

Air saw it length wise and you can split it open with a chisel.




If he grinds the factory studs off the back of the drum then he can work on the adapter more easily. The adapter won't stop him from removing the drum from the spindle.




, if it's the rear he is SOL , but notthe front.

Top

Advertisement
Sponsored Link
Forum Stats
25,260 Registered Members
32 Forums
189,019 Topics
2,204,482 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Dipstick hole plug
by bigdad
04/26/18 10:50 AM
1972 Roadrunner Speedometer Bounce
by jim6346
04/26/18 10:42 AM
82 /6 SHORTBOX BOISE AREA $4500
by bigdad
04/26/18 10:27 AM
NHRA Div 3 Norwalk race Tech Inspection
by HR3128
04/26/18 09:38 AM