300M harden input / output shafts for a RACE 904 trans - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 300M harden input / output shafts for a RACE 904 trans

Print Thread

300M harden input / output shafts for a RACE 904 trans #934617 02/21/11 11:00 PM 02/21/11 11:00 PM
Joined: Sep 2007 Posts: 2,584 sycamore,ohio B BobsProFab OP master
BobsProFab OP master B Joined: Sep 2007 Posts: 2,584 sycamore,ohio	i need to step up to the good shafts is there any other tranny places that make a 300M input and output shafts for a 904 besides A and A trans Rick has been out of them for quite awhile now and not sure when they will get in from grind and ready to ship. any help would be great Bob

Re: 300M harden input / output shafts for a RACE 904 trans [Re: BobsProFab] #934618 02/21/11 11:01 PM 02/21/11 11:01 PM
Joined: Jan 2003 Posts: 6,266 Renton Washington T Triple Threat master
Triple Threat master T Joined: Jan 2003 Posts: 6,266 Renton Washington	Try Protrans? -Dustin 67 Dart, 9 second, 392" G3 Hemi 68 Barracuda 340 F/SA

Re: 300M harden input / output shafts for a RACE 904 trans [Re: Triple Threat] #934619 02/21/11 11:04 PM 02/21/11 11:04 PM
Joined: Oct 2006 Posts: 4,590 Indy J joshking440 Lunch is on me!
joshking440 Lunch is on me! J Joined: Oct 2006 Posts: 4,590 Indy	Call cope?

Re: 300M harden input / output shafts for a RACE 904 trans [Re: Triple Threat] #934620 02/21/11 11:06 PM 02/21/11 11:06 PM
Joined: Oct 2004 Posts: 1,752 detroit area M moderncylinder top fuel
moderncylinder top fuel M Joined: Oct 2004 Posts: 1,752 detroit area	a friend of mine just went 8.04 at 165 in a 2850lb car with a 904 and std shafts,,, 1.10 60 ft, pro trans, 358 cu in, ss/am

Re: 300M harden input / output shafts for a RACE 904 trans [Re: BobsProFab] #934621 02/21/11 11:31 PM 02/21/11 11:31 PM
Joined: Dec 2004 Posts: 1,717 Rancho Cucamonga, Calif. P PUNK top fuel
PUNK top fuel P Joined: Dec 2004 Posts: 1,717 Rancho Cucamonga, Calif.	I believe that ProTrans makes them for A&A. They have been out of them for a long while. They build the Proflite transmissions that are so popular in comp eliminator and those guys pretty much consume the shafts when they are available. A friend of mine has had one them on order for his car for quite some time and he is local to ProTrans. Im not sure of what the deal is with them. Looks like someone may need to start tooling up for a product that is in decent demand. My friend Ron just snapped his output shaft behind his 904 with the 501" small block. He ended up getting a few good shafts, had them rockwell tested and then had them cryogenically treated, because the 300M shafts were unavailable. His Cryo-shafts are currently behind his big small block and he is keeping his fingers crossed. 10.53 @ 125mph. 1.37 60 foot. Caltracs and Monoleafs, AFCO shocks. Heads by INDIO MOTOR MACHINE; IMM. CP Pistons, PC Carbs.

Re: 300M harden input / output shafts for a RACE 904 trans [Re: BobsProFab] #934622 02/22/11 02:48 PM 02/22/11 02:48 PM
Joined: Dec 2006 Posts: 506 Texas Afghanistan Iraq etc. D DakFink mopar
DakFink mopar D Joined: Dec 2006 Posts: 506 Texas Afghanistan Iraq etc.	Supposedly this guy was making them for the Mopar Turbo guys that were using 904s Donato Engineering 2934 E. Maple Milfiord MI 48381 Tel: 248-676-8554 Fax: 248-676-8286 Contact: John donatoeng@aol.com These guys have them listed for 727s and other varients, Give them a call they might have them? http://www.transmissioncenter.net/hardened_shafts_and_drums.htm

Re: 300M harden input / output shafts for a RACE 904 trans [Re: DakFink] #934623 02/22/11 09:29 PM 02/22/11 09:29 PM
Joined: Sep 2007 Posts: 2,584 sycamore,ohio B BobsProFab OP master
BobsProFab OP master B Joined: Sep 2007 Posts: 2,584 sycamore,ohio	cant find any, so im sending a few stock sets out for cryogenic treatment

Re: 300M harden input / output shafts for a RACE 904 trans [Re: BobsProFab] #934624 02/22/11 09:41 PM 02/22/11 09:41 PM
Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere S S/ST 3040 master
S/ST 3040 master S Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere	I haven't wrung off any stockers yet.

Re: 300M harden input / output shafts for a RACE 904 trans [Re: BobsProFab] #934625 02/22/11 09:41 PM 02/22/11 09:41 PM
Joined: Jan 2003 Posts: 1,798 McGregor,Iowa 52157 5 500ciDuster top fuel
500ciDuster top fuel 5 Joined: Jan 2003 Posts: 1,798 McGregor,Iowa 52157	Thought I saw them for sale over on racing junk

Re: 300M harden input / output shafts for a RACE 904 trans [Re: BobsProFab] #934626 02/22/11 09:46 PM 02/22/11 09:46 PM
Joined: Jun 2010 Posts: 3,112 LONG ISLAND fishy340 master
fishy340 master Joined: Jun 2010 Posts: 3,112 LONG ISLAND	Quote: cant find any, so im sending a few stock sets out for cryogenic treatment i guess thats like viagra for metal!

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1