300M harden input / output shafts for a RACE 904 trans

i need to step up to the good shafts

is there any other tranny places that make a 300M input and output shafts for a 904 besides A and A trans

Rick has been out of them for quite awhile now and not sure when they will get in from grind and ready to ship.

any help would be great

Bob

Try Protrans?

Call cope?

a friend of mine just went 8.04 at 165 in a 2850lb car with a 904 and std shafts,,, 1.10 60 ft, pro trans, 358 cu in, ss/am

I believe that ProTrans makes them for A&A. They have been out of them for a long while. They build the Proflite transmissions that are so popular in comp eliminator and those guys pretty much consume the shafts when they are available. A friend of mine has had one them on order for his car for quite some time and he is local to ProTrans. Im not sure of what the deal is with them. Looks like someone may need to start tooling up for a product that is in decent demand. My friend Ron just snapped his output shaft behind his 904 with the 501" small block. He ended up getting a few good shafts, had them rockwell tested and then had them cryogenically treated, because the 300M shafts were unavailable. His Cryo-shafts are currently behind his big small block and he is keeping his fingers crossed.

Supposedly this guy was making them for the Mopar Turbo guys that were using 904s

Donato Engineering
2934 E. Maple
Milfiord MI 48381
Tel: 248-676-8554
Fax: 248-676-8286
Contact: John
donatoeng@aol.com

These guys have them listed for 727s and other varients, Give them a call they might have them?

http://www.transmissioncenter.net/hardened_shafts_and_drums.htm

cant find any, so im sending a few stock sets out for cryogenic treatment

I haven't wrung off any stockers yet.

Thought I saw them for sale over on racing junk

Quote:

---

cant find any, so im sending a few stock sets out for cryogenic treatment

---

i guess thats like viagra for metal!