|
|
will this cam work with stock pushrods and rockers?
#925120
02/09/11 11:17 PM
02/09/11 11:17 PM
|
Joined: Nov 2010
Posts: 3,696
jersey
Spaceman Spiff
OP
master
|
OP
master
Joined: Nov 2010
Posts: 3,696
jersey
|
http://www.summitracing.com/parts/CCA-K21-600-5/Going in a standard bore 413. Dont really have the funds to upgrade to roller rockers and related hardware. Will this work with stock equipment? Thanks! 
526 cubes of angry wedge, pushbutton shifted, 9 passenger killer!
|
|
|
Re: will this cam work with stock pushrods and rockers?
[Re: orangedustya]
#925123
02/10/11 10:35 AM
02/10/11 10:35 AM
|
Joined: Jan 2003
Posts: 21,076
Niles , Ohio
therocks
oh wait.but hey.lets see.oh yeah.
|
oh wait.but hey.lets see.oh yeah.
Joined: Jan 2003
Posts: 21,076
Niles , Ohio
|
I ran pretty much the same cam in a 440.As long as your rockers are in good shape they will be fine.Just remember in early BBs the push rods need changed as they wont work with later lifters.Summit has the rods .My kid has a set in his 62 413.Rocky
Chrysler Firepower
|
|
|
Re: will this cam work with stock pushrods and rockers?
[Re: goldmember]
#925124
02/10/11 10:38 AM
02/10/11 10:38 AM
|
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
Mr.Yuck
Not enough dumb comments...yet
|
Not enough dumb comments...yet
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
|
Quote:
You will need matching valve springs,you don't need roller rockers.
this link was for anentire cam kit including springs so he should be fine.
|
|
|
Re: will this cam work with stock pushrods and rockers?
[Re: Spaceman Spiff]
#925126
02/11/11 09:04 AM
02/11/11 09:04 AM
|
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
Mr.Yuck
Not enough dumb comments...yet
|
Not enough dumb comments...yet
Joined: Jan 2003
Posts: 24,562
Brookeville, Md
|
Quote:
Quote:
I ran pretty much the same cam in a 440.As long as your rockers are in good shape they will be fine.Just remember in early BBs the push rods need changed as they wont work with later lifters.Summit has the rods .My kid has a set in his 62 413.Rocky
It's a '65 engine. Does it have the early pushrods? I'm assuming to just ask for pushrods for an rb engine?
Thanks everyone.
I'm REALLY trying to get this car to Carlisle. All thats left is the drivetrain, body and paint, interior, and suspension. 
if it's a 65 engine and nobodys been inside it... you will need new push-rods. really not a big deal. Summit has them for under $40
|
|
|
|
|
|
|
On the need for newer pushrods.