Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
I was thinking...3 second passes....1/8 th mile #893892
01/01/11 06:45 PM
01/01/11 06:45 PM
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,544
Syracuse,NY
The other day I was thinking about some 3 second passes as it was being discussed by some internet racers. They were talking about " easy 3's" once this gets fixed, that gets fixed and so forth. Now friends, its one thing to run a low 4.20 or so. Its another to run a 3-anything! Its funny how people throw around the ETs like they are on the shelf at WalMart just to purchase when ready...


Sooo, being winter, thought it would be cool to throw some video's up there for fun, and you can make a pass inside a 3 second Pro Top Outlaw car. These cars are pretty cool, still on a very grassroots sportsman level, ( for most, not ALL..lol)and certainly fast.

The first link is our car, with Bob Frigon driving his Spitzer 451" Hemi, against the new ET record at the time, Sheldon Bissesar of Trinidad. Although Bob got treed a bit, he was charging hard with the " kitchen sink" tune up...
Bon set the class MPH record on the same run as Sheldon set the ET record.Bob usually hits the tree hard, was just not in the cards that day. Its racing.

Scott Koffel is a big part of this Pro Outlaw series and deserves much credit for his behind the scenes efforts, along with the Lake Erie Monster.Anyone with any interest of helping sponsor the Pro Top Outlaw class for 2011, can get ahold of Scott as well ( I know...I know..shameless plug )

The second video is the in car pass from Sheldons car. As you can see, this " easy 3 second" thing isnt quite so easy. Not your mothers' Oldsmobile.

Whats really cool about these guys is for the most part they all just get along, actually talk to each other at the races, no egos, no BS, and you can see at the end Bob is the first guy to come congratulate the winner. Its a cool deal.If someone needs a part, there are often many people offering up their help, even if it means getting taken out.

These cars are NOT screw blower cars either. Just throwing it out there for some Winter fun....carry on....


http://www.youtube.com/watch?v=_6Ka4L3Uwqw&feature=related

http://www.youtube.com/watch?v=agtKMlejjKM&NR=1


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: I was thinking...3 second passes....1/8 th mile [Re: CompWedgeEngines] #893893
01/01/11 07:20 PM
01/01/11 07:20 PM
Joined: Mar 2006
Posts: 5,067
Orlando Florida
blown572dart Offline
master
blown572dart  Offline
master

Joined: Mar 2006
Posts: 5,067
Orlando Florida
Very cool

Re: I was thinking...3 second passes....1/8 th mile [Re: blown572dart] #893894
01/01/11 07:53 PM
01/01/11 07:53 PM
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL Offline
Senior Member of the Junior Dragster Club
WILD BILL  Offline
Senior Member of the Junior Dragster Club

Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
Goota give a to all these guys. Making insane power

Monster wheel stand

Re: I was thinking...3 second passes....1/8 th mile [Re: CompWedgeEngines] #893895
01/01/11 08:03 PM
01/01/11 08:03 PM
Joined: Nov 2003
Posts: 2,503
Illinois
CRE2004 Offline
super gas
CRE2004  Offline
super gas

Joined: Nov 2003
Posts: 2,503
Illinois
Running a low 4.20 isn't easy or cheap either

Re: I was thinking...3 second passes....1/8 th mile [Re: CompWedgeEngines] #893896
01/01/11 08:14 PM
01/01/11 08:14 PM
Joined: Jul 2005
Posts: 8,647
ELYRIA,OH
B
blownzoom440 Offline
blownzoom440  Offline
B

Joined: Jul 2005
Posts: 8,647
ELYRIA,OH
where are thay going to race this yr?no norwalk or are thay in with other events?good luck to Scott and the crew!

Re: I was thinking...3 second passes....1/8 th mile [Re: blownzoom440] #893897
01/01/11 08:14 PM
01/01/11 08:14 PM
Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
WILD BILL Offline
Senior Member of the Junior Dragster Club
WILD BILL  Offline
Senior Member of the Junior Dragster Club

Joined: Dec 2007
Posts: 10,542
BROOK PARK, OH
Quote:

where are thay going to race this yr?no norwalk or are thay in with other events?good luck to Scott and the crew!






Re: I was thinking...3 second passes....1/8 th mile [Re: CRE2004] #893898
01/01/11 08:15 PM
01/01/11 08:15 PM
Joined: Jan 2003
Posts: 32,394
Q
Quicktree Offline
I Win
Quicktree  Offline
I Win
Q

Joined: Jan 2003
Posts: 32,394
when you have the potential to make 3000hp a 3 second pass well with in reason. now getting the tune and the chassis set up to do it make take some time especially a new car.

Re: I was thinking...3 second passes....1/8 th mile [Re: Quicktree] #893899
01/01/11 08:38 PM
01/01/11 08:38 PM
Joined: Jun 2010
Posts: 3,112
LONG ISLAND
fishy340 Offline
master
fishy340  Offline
master

Joined: Jun 2010
Posts: 3,112
LONG ISLAND
3's geez thats a relm i cant imagine,when i get done i'll be tickled with 5.30's

Re: I was thinking...3 second passes....1/8 th mile [Re: fishy340] #893900
01/01/11 08:52 PM
01/01/11 08:52 PM
Joined: Jan 2003
Posts: 32,394
Q
Quicktree Offline
I Win
Quicktree  Offline
I Win
Q

Joined: Jan 2003
Posts: 32,394
I have made plenty of 4 second passes and that was a rush

Re: I was thinking...3 second passes....1/8 th mile [Re: blownzoom440] #893901
01/01/11 08:53 PM
01/01/11 08:53 PM
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,544
Syracuse,NY
Scott is working on some things, but no, it doesnt appear Norwalk is going to happen. Hoping for maybe a 3 track deal this year....I need to call Scott after the Holidays...its going to get interesting this year...


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: I was thinking...3 second passes....1/8 th mile [Re: fishy340] #893902
01/01/11 08:55 PM
01/01/11 08:55 PM
Joined: Jan 2003
Posts: 6,142
Melbourne , Australia
LA360 Offline
master
LA360  Offline
master

Joined: Jan 2003
Posts: 6,142
Melbourne , Australia


Alan Jones
Re: I was thinking...3 second passes....1/8 th mile [Re: LA360] #893903
01/01/11 10:27 PM
01/01/11 10:27 PM
Joined: Jul 2006
Posts: 9,366
Lehigh Acres, Florida
rickstershemi Offline
master
rickstershemi  Offline
master

Joined: Jul 2006
Posts: 9,366
Lehigh Acres, Florida
Running 3's in a dragster is fast.....doing it in a door car is down right impressive

Rickster

Re: I was thinking...3 second passes....1/8 th mile [Re: rickstershemi] #893904
01/01/11 10:32 PM
01/01/11 10:32 PM
Joined: Oct 2004
Posts: 8,165
Left Coast
B
BobR Offline
master
BobR  Offline
master
B

Joined: Oct 2004
Posts: 8,165
Left Coast
Depending on the weight of the door car it takes 3000+ horsepower to get it done. We've been 4.30 at 2950 pounds on a 10.5W.

Re: I was thinking...3 second passes....1/8 th mile [Re: BobR] #893905
01/01/11 10:43 PM
01/01/11 10:43 PM
Joined: Jul 2005
Posts: 8,647
ELYRIA,OH
B
blownzoom440 Offline
blownzoom440  Offline
B

Joined: Jul 2005
Posts: 8,647
ELYRIA,OH
Bill Lutz is building a twin turbo hemi i am sure will make a good effert.

Re: I was thinking...3 second passes....1/8 th mile [Re: rickstershemi] #893906
01/01/11 10:50 PM
01/01/11 10:50 PM
Joined: Mar 2006
Posts: 5,067
Orlando Florida
blown572dart Offline
master
blown572dart  Offline
master

Joined: Mar 2006
Posts: 5,067
Orlando Florida
Quote:

Running 3's in a dragster is fast.....doing it in a door car is down right impressive

Rickster








Re: I was thinking...3 second passes....1/8 th mile [Re: LA360] #893907
01/01/11 11:12 PM
01/01/11 11:12 PM
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
CompWedgeEngines Offline OP
master
CompWedgeEngines  Offline OP
master

Joined: Nov 2004
Posts: 3,544
Syracuse,NY
Pappas has a BAD machine for sure....that is just monster. Now if we can find a way to get his budget....hmmmmm...


There is no doubt that the door car scene is really on the edge...the number of fast door cars seems like it has grown 4 fold over the last 5 years...its really something to see.

I've watched the Division 1 Top Sportsman cars go from Top Sportsman to mild Pro Modifieds basically...nuts.


RIP Monte Smith

Your work is a reflection of yourself, autograph it with quality.

WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
Re: I was thinking...3 second passes....1/8 th mile [Re: BobR] #893908
01/02/11 01:50 PM
01/02/11 01:50 PM
Joined: Jul 2003
Posts: 12,129
Cleveland
sunroofgtx Offline
I Live Here
sunroofgtx  Offline
I Live Here

Joined: Jul 2003
Posts: 12,129
Cleveland
Quote:

Depending on the weight of the door car it takes 3000+ horsepower to get it done. We've been 4.30 at 2950 pounds on a 10.5W.




Bob, that Mustang that you help with is one of the baddest on the planet. Especially what is happening with it now. Can't wait to see it. The money, engineering, and most of all driving that these guys have to do to get 3000 plus hp to hook on the small tires is incredible.


Join the quickest team in motorsports. Team FireCore. CustomWiresets.com
Re: I was thinking...3 second passes....1/8 th mile [Re: BobR] #893909
01/02/11 02:57 PM
01/02/11 02:57 PM
Joined: Nov 2004
Posts: 6,890
North Alabama
M
Monte_Smith Offline
master
Monte_Smith  Offline
master
M

Joined: Nov 2004
Posts: 6,890
North Alabama
Quote:

Depending on the weight of the door car it takes 3000+ horsepower to get it done. We've been 4.30 at 2950 pounds on a 10.5W.


Does'nt quite take 3000hp to get it done in a door car. There is not a nitrous Pro-Mod in the country that makes that kind of steam, yet the quickest nitrous, door car is 3.81.

As far as "easy" 3s...no such thing. I have some auto Pro-Mod customers, who have spent thousands and thousands of dollars, to get from low, low, 4.0s, to that elusive 3 sec number. It's tough

When you get to that point though, it is usually not about power. If you have the power to go a low 4.0, you likely have the power to go 3s. It is all about the combination at that point and putting it down. When the stars align and you make that "best ever" pass, with your best ever 330 numbers and you best ever backhalf number, enjoy it, because it may be a while before you put that together again.....but thats what keeps us all going back. That elusive "best ever" pass

Monte

Re: I was thinking...3 second passes....1/8 th mile [Re: blownzoom440] #893910
01/03/11 03:11 PM
01/03/11 03:11 PM
Joined: Oct 2004
Posts: 8,165
Left Coast
B
BobR Offline
master
BobR  Offline
master
B

Joined: Oct 2004
Posts: 8,165
Left Coast
Quote:

Bill Lutz is building a twin turbo hemi i am sure will make a good effert.




We're building a twin turbo BAE hemi right this minute. Bill has been a 10.5 guy so assuming he remains in that class it will be dependant on the weight of his car.

Re: I was thinking...3 second passes....1/8 th mile [Re: sunroofgtx] #893911
01/03/11 03:16 PM
01/03/11 03:16 PM
Joined: Oct 2004
Posts: 8,165
Left Coast
B
BobR Offline
master
BobR  Offline
master
B

Joined: Oct 2004
Posts: 8,165
Left Coast
Quote:

Quote:

Depending on the weight of the door car it takes 3000+ horsepower to get it done. We've been 4.30 at 2950 pounds on a 10.5W.




Bob, that Mustang that you help with is one of the baddest on the planet. Especially what is happening with it now. Can't wait to see it. The money, engineering, and most of all driving that these guys have to do to get 3000 plus hp to hook on the small tires is incredible.




Thanks Rick. Yes we got that deal to run pretty well. The new hemi motor is my dream come true. I finally got Doug talked into it and now it's on.

Page 1 of 2 1 2






Powered by UBB.threads™ PHP Forum Software 7.7.1