moroso vacuum pump bearing replacement help - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech moroso vacuum pump bearing replacement help

Print Thread

moroso vacuum pump bearing replacement help #889973 12/27/10 11:58 PM 12/27/10 11:58 PM
Joined: Mar 2010 Posts: 939 glendora, ca. D Deepockets OP super stock
Deepockets OP super stock D Joined: Mar 2010 Posts: 939 glendora, ca.	just wondering how i might remove the rear bearing from the housing? any do it your self ideas. thanks

Re: moroso vacuum pump bearing replacement help [Re: Deepockets] #889974 12/28/10 01:18 AM 12/28/10 01:18 AM
Joined: Jun 2004 Posts: 2,360 Mobile Alabama S SB412DUSTER top fuel
SB412DUSTER top fuel S Joined: Jun 2004 Posts: 2,360 Mobile Alabama	If it were me I would remove everything from the housing and place it on a hot plate then after several minutes turn it over and let it fall out

Re: moroso vacuum pump bearing replacement help [Re: Deepockets] #889975 12/28/10 01:37 AM 12/28/10 01:37 AM
Joined: Oct 2005 Posts: 8,869 Ontario, Canada S Stanton Don't question me!
Stanton Don't question me! S Joined: Oct 2005 Posts: 8,869 Ontario, Canada	Have you tried packing the shaft hole with grease and then tapping in a rod or dowel - the pressure on the grease should push out the bearing (similar to removing a bushing in a blind hole).

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1