Posted By: Deepockets
moroso vacuum pump bearing replacement help - 12/28/10 03:58 AM
just wondering how i might remove the rear bearing from the housing? any do it your self ideas. thanks
Posted By: SB412DUSTER
Re: moroso vacuum pump bearing replacement help - 12/28/10 05:18 AM
If it were me I would remove everything from the housing and place it on a hot plate then after several minutes turn it over and let it fall out
Posted By: Stanton
Re: moroso vacuum pump bearing replacement help - 12/28/10 05:37 AM
Have you tried packing the shaft hole with grease and then tapping in a rod or dowel - the pressure on the grease should push out the bearing (similar to removing a bushing in a blind hole).