SCE ICS Titan Copper Head Gaskets - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech SCE ICS Titan Copper Head Gaskets

Print Thread

SCE ICS Titan Copper Head Gaskets #882306 12/17/10 11:04 AM 12/17/10 11:04 AM
Joined: Feb 2005 Posts: 982 western pennsylvania b1dartsport OP super stock
b1dartsport OP super stock Joined: Feb 2005 Posts: 982 western pennsylvania	Thinking about going to the Titan ics gaskets. Been using the cometics and sick and tired of them leaking,weeping ect. Anybody using the new copper head gaskets with built in O ring and sealant?

Re: SCE ICS Titan Copper Head Gaskets [Re: b1dartsport] #882307 12/17/10 01:49 PM 12/17/10 01:49 PM
Joined: Jan 2003 Posts: 5,484 SoCal Brian Hafliger master
Brian Hafliger master Joined: Jan 2003 Posts: 5,484 SoCal	Quote: Thinking about going to the Titan ics gaskets. Been using the cometics and sick and tired of them leaking,weeping ect. Anybody using the new copper head gaskets with built in O ring and sealant? Yes they work good but the beads around the water holes are never correct especially for Indy heads. I order them without the beads, and then silicone around the water holes of the head AND the block and then your good to go. Brian Brian Hafliger

Re: SCE ICS Titan Copper Head Gaskets [Re: b1dartsport] #882308 12/17/10 02:09 PM 12/17/10 02:09 PM
Joined: Aug 2003 Posts: 43,141 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,141 Bend,OR USA	Quote: Thinking about going to the Titan ics gaskets. Been using the cometics and sick and tired of them leaking,weeping ect. Anybody using the new copper head gaskets with built in O ring and sealant? I have used them on several street motors(blown hemis and wedges) and race motors, no problems at all Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: SCE ICS Titan Copper Head Gaskets [Re: Brian Hafliger] #882309 12/17/10 02:55 PM 12/17/10 02:55 PM
Joined: Feb 2005 Posts: 982 western pennsylvania b1dartsport OP super stock
b1dartsport OP super stock Joined: Feb 2005 Posts: 982 western pennsylvania	Quote: Quote: Thinking about going to the Titan ics gaskets. Been using the cometics and sick and tired of them leaking,weeping ect. Anybody using the new copper head gaskets with built in O ring and sealant? Yes they work good but the beads around the water holes are never correct especially for Indy heads. I order them without the beads, and then silicone around the water holes of the head AND the block and then your good to go. Brian I have the 360-2 indys 230cc. Brian,do you think it would be difficult to fix them even with the beads on? I have a chance to buy an unused set very cheap.

Re: SCE ICS Titan Copper Head Gaskets [Re: b1dartsport] #882310 12/17/10 03:30 PM 12/17/10 03:30 PM
Joined: Jan 2003 Posts: 990 Vacherie, Louisiana S SuperStocker super gas
SuperStocker super gas S Joined: Jan 2003 Posts: 990 Vacherie, Louisiana	FWIW, I used these before with the beads and just sealed the block and heads with sealer. They then worked great and hadn't had any other trouble with them. Just go ahead and seal the water ports and you'll be fine.

Re: SCE ICS Titan Copper Head Gaskets [Re: SuperStocker] #882311 12/17/10 06:26 PM 12/17/10 06:26 PM
Joined: Oct 2005 Posts: 976 ontario canada mac56 super stock
mac56 super stock Joined: Oct 2005 Posts: 976 ontario canada	Are these gaskets reusable?

Re: SCE ICS Titan Copper Head Gaskets [Re: SuperStocker] #882312 12/18/10 12:31 AM 12/18/10 12:31 AM
Joined: Jan 2003 Posts: 5,484 SoCal Brian Hafliger master
Brian Hafliger master Joined: Jan 2003 Posts: 5,484 SoCal	Quote: FWIW, I used these before with the beads and just sealed the block and heads with sealer. They then worked great and hadn't had any other trouble with them. Just go ahead and seal the water ports and you'll be fine. Brian Hafliger

Re: SCE ICS Titan Copper Head Gaskets [Re: mac56] #882313 12/18/10 07:52 AM 12/18/10 07:52 AM
Joined: Feb 2004 Posts: 1,093 Long Beach, CA Mike Swann super stock
Mike Swann super stock Joined: Feb 2004 Posts: 1,093 Long Beach, CA	Quote: Are these gaskets reusable? Yes, until the o-ring groove starts widening due to detonation. You will also see some blackness (carbon deposits)between adjacent cylinders when this happens. 8.30's @3400 lbs

Re: SCE ICS Titan Copper Head Gaskets [Re: Mike Swann] #882314 12/18/10 04:30 PM 12/18/10 04:30 PM
Joined: Feb 2005 Posts: 982 western pennsylvania b1dartsport OP super stock
b1dartsport OP super stock Joined: Feb 2005 Posts: 982 western pennsylvania	Thanks for the info guys, I just picked up the new gaskets, looks like a piece of cake to seal em up -Randy

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1