abs light and brake light on UPDATE
#860888
11/22/10 08:35 PM
11/22/10 08:35 PM
|
Joined: Sep 2003
Posts: 763 Nashport, OH
chargers777
OP
super stock
|
OP
super stock
Joined: Sep 2003
Posts: 763
Nashport, OH
|
Truck is a 1997 dodge 1500 4x4 with 360.Can the speed sensor cause this or is it something else.The brake pedal feels fine with good braking.I checked the codes by grounding pin 13.It showed code 6 which was erratic speed sensor reading while rolling.I replaced the sensor.Didnt work so I took it back out and cleaned the mounting area really well (rust buildup)and replaced it.I have driven it about 50 miles with no lights coming on so maybe its fixed.Thanks to all who helped.
Last edited by chargers777; 11/25/10 12:14 AM.
|
|
|
Re: abs light and brake light on
[Re: chargers777]
#860889
11/22/10 08:36 PM
11/22/10 08:36 PM
|
Joined: Jan 2003
Posts: 320 Dallas, TX
71_Demon
enthusiast
|
enthusiast
Joined: Jan 2003
Posts: 320
Dallas, TX
|
Most likely rear speed sensor mounted on diff. I think its a dealer item only.
'71 Demon 383 auto
'12 Ram 2500 6.7 Diesel
|
|
|
Re: abs light and brake light on
[Re: chargers777]
#860893
11/22/10 10:34 PM
11/22/10 10:34 PM
|
Joined: Feb 2007
Posts: 2,315 MOPAR HEADQUARTERS IN ALDEN NY
hemigod426
top fuel
|
top fuel
Joined: Feb 2007
Posts: 2,315
MOPAR HEADQUARTERS IN ALDEN NY
|
on that year dodge ram the speed sensor is in trans case(tail shaft) has nothing to do with abs. the rear abs sensor is in top of rear axle housing, runs off plate next to ring gear. could that one or left or right front sensors or wire split or rotted going to them
MOPAR OR NO CAR
|
|
|
Re: abs light and brake light on
[Re: chargers777]
#860894
11/22/10 10:50 PM
11/22/10 10:50 PM
|
Joined: Feb 2007
Posts: 2,315 MOPAR HEADQUARTERS IN ALDEN NY
hemigod426
top fuel
|
top fuel
Joined: Feb 2007
Posts: 2,315
MOPAR HEADQUARTERS IN ALDEN NY
|
was just thinking have not work on a 1997 ram in a while, do those just have rear abs? if so just replace rear axle sensor. or try cleaning it remember it gets metal gear chips on it and fails to read
MOPAR OR NO CAR
|
|
|
Re: abs light and brake light on
[Re: hemigod426]
#860895
11/22/10 10:54 PM
11/22/10 10:54 PM
|
Joined: Oct 2003
Posts: 1,371 Costa Mesa, CA
chache876
pro stock
|
pro stock
Joined: Oct 2003
Posts: 1,371
Costa Mesa, CA
|
Quote:
was just thinking have not work on a 1997 ram in a while, do those just have rear abs? if so just replace rear axle sensor. or try cleaning it remember it gets metal gear chips on it and fails to read
I was just looking it up on alldata and it mentions some have 4 wheel abs so it may have front wheel speed sensors
|
|
|
Re: abs light and brake light on
[Re: chargers777]
#860898
11/23/10 12:27 AM
11/23/10 12:27 AM
|
Joined: Oct 2003
Posts: 1,371 Costa Mesa, CA
chache876
pro stock
|
pro stock
Joined: Oct 2003
Posts: 1,371
Costa Mesa, CA
|
Quote:
I mbeleive mine has rear only abs.
use a DMM and check the sensor with the specs I posted earlier to test it. If it checks out inspect the wiring
|
|
|
Re: abs light and brake light on
[Re: chache876]
#860899
11/23/10 04:00 AM
11/23/10 04:00 AM
|
Joined: Jun 2004
Posts: 3,319 Chicago Burbs
sthemi
master
|
master
Joined: Jun 2004
Posts: 3,319
Chicago Burbs
|
Most likely the speed sensor. Aftermarket does sell them, Carquest etc... Here is what mine looked like 01 Ram 1500
|
|
|
Re: abs light and brake light on
[Re: sthemi]
#860900
11/23/10 04:07 AM
11/23/10 04:07 AM
|
Joined: Jan 2003
Posts: 9,826 las vegas
70AARcuda
master
|
master
Joined: Jan 2003
Posts: 9,826
las vegas
|
check your fuses....
my 94 Ram had abs and brake light on ...had burned fuze on brake lights
Last edited by 70AARcuda; 11/23/10 04:17 AM.
Tony
70 AARCuda Vitamin C 71 Dart Swinger 360 10.318 @ 128.22(10-04-14 Bakersfield) 71 Demon 360 10.666 @122.41 (01-29-17 @ Las Vegas) 71 Duster 408 (10.29 @ 127.86 3/16/19 Las Vegas)
|
|
|
Re: abs light and brake light on
[Re: 70AARcuda]
#860901
11/23/10 08:08 AM
11/23/10 08:08 AM
|
Joined: Feb 2010
Posts: 1,377 Ohio
Todd
pro stock
|
pro stock
Joined: Feb 2010
Posts: 1,377
Ohio
|
Quote:
check your fuses....
my 94 Ram had abs and brake light on ...had burned fuze on brake lights
Check the fuses both. The brake lights and the abs fuses. The codes can be read by grounding one of the pins if i remember its pin 13 in the dlc. Then read the flashes of the abs light. Btw the rear sensor should read around 1200-1500 ohms.
|
|
|
|
|