GOT THEM ON W/ PICS NEED INFO ASSEMBLING COIL OVERS - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech GOT THEM ON W/ PICS NEED INFO ASSEMBLING COIL OVERS

Print Thread

Page 2 of 3

1

2

3

Re: NEED INFO ASSEMBLING COIL OVERS [Re: Monte_Smith] #818402 09/30/10 03:30 PM 09/30/10 03:30 PM
Joined: Oct 2008 Posts: 29 new brunswick , canada B bigblocka member
bigblocka member B Joined: Oct 2008 Posts: 29 new brunswick , canada	i had the same problem when i bought my front struts so i took them to the local motorcycle dealer. the compresser they have for bike shocks are roughly the same size.they had them installed in about 10 minutes.hope this helps. Ed Geldart

Re: NEED INFO ASSEMBLING COIL OVERS [Re: HEMIFRED] #818403 09/30/10 03:33 PM 09/30/10 03:33 PM
Joined: Feb 2008 Posts: 452 Monrovia, So-Cal, USA racerhog mopar
racerhog mopar Joined: Feb 2008 Posts: 452 Monrovia, So-Cal, USA	Here you go Fred.....Head down to the roundy Round shop.... http://www.tdrracingproducts.com/Racing_Products.html Bob(Cowboy)Hogan Monrovia So-Cal

Re: NEED INFO ASSEMBLING COIL OVERS [Re: racerhog] #818404 09/30/10 06:16 PM 09/30/10 06:16 PM
Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY HEMIFRED OP master
HEMIFRED OP master Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY	put spring on the trans jack under the lift and used ties 6225142-44444444444444444.jpg (93 downloads) home of the Sox and Martin Hemi Duster

Re: NEED INFO ASSEMBLING COIL OVERS [Re: HEMIFRED] #818405 09/30/10 06:17 PM 09/30/10 06:17 PM
Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY HEMIFRED OP master
HEMIFRED OP master Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY	assembled and ready 6225143-55555555555555.jpg (80 downloads) home of the Sox and Martin Hemi Duster

Re: NEED INFO ASSEMBLING COIL OVERS [Re: HEMIFRED] #818406 09/30/10 06:57 PM 09/30/10 06:57 PM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	Glad you thought of that [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Re: NEED INFO ASSEMBLING COIL OVERS [Re: B G Racing] #818407 09/30/10 07:38 PM 09/30/10 07:38 PM
A Anonymous Unregistered
Anonymous Unregistered A	See, zipties do serve a purpose other than cheap handcuffs! ...er, not that you had them lying around for that purpose...

Re: NEED INFO ASSEMBLING COIL OVERS #818408 09/30/10 08:15 PM 09/30/10 08:15 PM
Joined: Dec 2007 Posts: 10,542 BROOK PARK, OH WILD BILL Senior Member of the Junior Dragster Club
WILD BILL Senior Member of the Junior Dragster Club Joined: Dec 2007 Posts: 10,542 BROOK PARK, OH	And here I thought zip ties wouldn't have cut it Well done

Re: NEED INFO ASSEMBLING COIL OVERS [Re: HEMIFRED] #818409 09/30/10 08:45 PM 09/30/10 08:45 PM
Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY HEMIFRED OP master
HEMIFRED OP master Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY	Quote: put spring on the trans jack under the lift and used ties the above courtesy of a BG phone call home of the Sox and Martin Hemi Duster

Re: NEED INFO ASSEMBLING COIL OVERS [Re: HEMIFRED] #818410 09/30/10 08:53 PM 09/30/10 08:53 PM
Joined: Oct 2006 Posts: 4,590 Indy J joshking440 Lunch is on me!
joshking440 Lunch is on me! J Joined: Oct 2006 Posts: 4,590 Indy	Call mike and tell him to assemble his junk before he sends it to you

Re: NEED INFO ASSEMBLING COIL OVERS [Re: joshking440] #818411 09/30/10 08:55 PM 09/30/10 08:55 PM
Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY HEMIFRED OP master
HEMIFRED OP master Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY	Quote: Call mike and tell him to assemble his junk before he sends it to you and wait another month??? I ordered shocks last year and just got these home of the Sox and Martin Hemi Duster

Re: NEED INFO ASSEMBLING COIL OVERS [Re: HEMIFRED] #818412 09/30/10 09:01 PM 09/30/10 09:01 PM
Joined: Oct 2006 Posts: 4,590 Indy J joshking440 Lunch is on me!
joshking440 Lunch is on me! J Joined: Oct 2006 Posts: 4,590 Indy	Mike.....make you wait.....no way

Re: NEED INFO ASSEMBLING COIL OVERS [Re: joshking440] #818413 09/30/10 09:20 PM 09/30/10 09:20 PM
Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY HEMIFRED OP master
HEMIFRED OP master Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY	Quote: Mike.....make you wait.....no way claims it's not his fault. It has something to do with global warming and it's effect on Chinese women mining the aluminum during their time of the month. home of the Sox and Martin Hemi Duster

Re: NEED INFO ASSEMBLING COIL OVERS [Re: HEMIFRED] #818414 09/30/10 10:58 PM 09/30/10 10:58 PM
Joined: Oct 2006 Posts: 4,590 Indy J joshking440 Lunch is on me!
joshking440 Lunch is on me! J Joined: Oct 2006 Posts: 4,590 Indy	hahahahaha....

Re: NEED INFO ASSEMBLING COIL OVERS [Re: HEMIFRED] #818415 09/30/10 11:25 PM 09/30/10 11:25 PM
Joined: Nov 2004 Posts: 6,890 North Alabama M Monte_Smith master
Monte_Smith master M Joined: Nov 2004 Posts: 6,890 North Alabama	Quote: Quote: put spring on the trans jack under the lift and used ties the above courtesy of a BG phone call I think somebody else posted that around 2:15 Monte

Re: NEED INFO ASSEMBLING COIL OVERS [Re: Monte_Smith] #818416 10/01/10 02:34 AM 10/01/10 02:34 AM
Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY HEMIFRED OP master
HEMIFRED OP master Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY	Quote: Quote: Quote: put spring on the trans jack under the lift and used ties the above courtesy of a BG phone call I think somebody else posted that around 2:15 Monte true but BG called right after he posted this at 12.28. Quote: Barnyard Bob Reged: Mar 28 2006 Loc: Eighty Four, PA Re: NEED INFO ASSEMBLING COIL OVERS [Re: WILD BILL] #6224775 - Thu Sep 30 2010 12:28 PM Edit Reply Quote Quick Reply Fred,are the springs the coorect length for the shock?I had a similar problem with a set that I was putting a 12" spring on and it was built for a 10" spring.Usually spin the adjusters all the way down and push the slotted top retainer in at an angle till it sits flush on the spring. Also try collasping the spring and use a couple of heavy wire ties to hold it and install the spriing and retainer that way.Be carefull and use substancial ties then he whinned about it here so I made that post Quote: - Thu Sep 30 2010 05:57 PM Edit Reply Quote Quick Reply Glad you thought of that Thanks Monte home of the Sox and Martin Hemi Duster

Re: NEED INFO ASSEMBLING COIL OVERS [Re: HEMIFRED] #818417 10/01/10 08:11 AM 10/01/10 08:11 AM
Joined: Mar 2006 Posts: 9,910 Eighty Four, PA B G Racing master
B G Racing master Joined: Mar 2006 Posts: 9,910 Eighty Four, PA	Quote: Quote: Quote: Quote: put spring on the trans jack under the lift and used ties the above courtesy of a BG phone call I think somebody else posted that around 2:15 Monte true but BG called right after he posted this at 12.28. Quote: Barnyard Bob Reged: Mar 28 2006 Loc: Eighty Four, PA Re: NEED INFO ASSEMBLING COIL OVERS [Re: WILD BILL] #6224775 - Thu Sep 30 2010 12:28 PM Edit Reply Quote Quick Reply Fred,are the springs the coorect length for the shock?I had a similar problem with a set that I was putting a 12" spring on and it was built for a 10" spring.Usually spin the adjusters all the way down and push the slotted top retainer in at an angle till it sits flush on the spring. Also try collasping the spring and use a couple of heavy wire ties to hold it and install the spriing and retainer that way.Be carefull and use substancial ties then he whinned about it here so I made that post Quote: - Thu Sep 30 2010 05:57 PM Edit Reply Quote Quick Reply Glad you thought of that Thanks Monte I wasn't whinning,you wouldn't read the post completely.You were whinning so I called and got you to stop talking long enough to listen,since you can't read.It's a Joisey thing.All I heard from you was "I can't,I can't" take a lesson from the current presidents campain slogen"yes we can"now drop your pants. [IMG]http://i430.photobucket.com/albums/qq21/ajcasini/max_zpsdppwd9km.jpg[/IMG]

Re: NEED INFO ASSEMBLING COIL OVERS [Re: B G Racing] #818418 10/01/10 08:20 AM 10/01/10 08:20 AM
Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY HEMIFRED OP master
HEMIFRED OP master Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY	drop pants ? 6226154-winnercircleRoxboro1.jpg (57 downloads) home of the Sox and Martin Hemi Duster

Re: NEED INFO ASSEMBLING COIL OVERS [Re: HEMIFRED] #818419 10/01/10 09:49 AM 10/01/10 09:49 AM
Joined: Aug 2007 Posts: 2,449 nc E earthmover top fuel
earthmover top fuel E Joined: Aug 2007 Posts: 2,449 nc	hay fred so you come out to roxboro speed way in north carolina......good old country racing at its best

Re: NEED INFO ASSEMBLING COIL OVERS [Re: HEMIFRED] #818420 10/01/10 10:43 AM 10/01/10 10:43 AM
Joined: Jun 2009 Posts: 705 Michigan H Hemiroid super stock
Hemiroid super stock H Joined: Jun 2009 Posts: 705 Michigan	Quote: drop pants ? LOL!! Ok, that picture is wrong in so many ways

Re: NEED INFO ASSEMBLING COIL OVERS [Re: earthmover] #818421 10/01/10 12:31 PM 10/01/10 12:31 PM
Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY HEMIFRED OP master
HEMIFRED OP master Joined: Jul 2010 Posts: 3,502 SOUTH JERSEY	Quote: hay fred so you come out to roxboro speed way in north carolina......good old country racing at its best I have been there twice. once we had a Ronnie Sox Memorial race and then the year before last. Roxboro has just listed Grudge night Friday the 15th . I should be there with Eugene Coard and the Ronnie Lyles car. Free BBQ chicken and wet T shirt contest Going to try Piedmont on Oct 14 or Oct 17 That picture is of Hemiparts after he got beat by my Duster when he was driving the Motown Missile. Chris was all posed up for a serious shot and I snuck up just as they took the picture

Page 2 of 3

1

2

3

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1