i just picked up a 69 rr for my project . the car came with a center console which i beleive goes to a 66 charger. it is missing the back half of it does somebody make this part or should i sell it and get what i need . also this console has the factory tach thanks ronny

The 66-67 Charger never had the tach on the console since it was in the dash. Chargers had a clock there (or perhaps the vacuum gauge). Other b-bodies had a piece that attached to the back of the console and used the tach (which is fairly valuable if it works).

i seen this console on e bay they said it came off a 66 whatyears would have used this . does anybody know how to wire this tach .

If it is a 66 tach it needs a separate sending unit.

it has 3 wires so it probaly does

Yep, three wires is a 66 and needs the sending unit, BUT check with http://rt-eng.com/mediawiki/index.php/Main_Page (Real Time Engineering) and see if their replacement tach board will work with the 66 dial. If it will your problem is solved.

thanks for the info

If you post a picture, it may help in figureing out what its from. Just a thought.

The back end of some of those older consoles had a cigarette lighter and/or a floor light. When you open the car doors the front console lights and that back light would illuminate the floor areas.

ill try to post pics this weekend its a mopar tach the top plate holes were made for it. isaw one on e bay just like it.ill get the part numbers on the plate to i dont beleive the car came with a console as i see no evidence of bracketry i beleive it was a column shift. car

im having a hard time posting pics . the tach is a 4 wire not a 3 wire