Recommend a Hemi builder in the Southwest??
#803438
09/16/10 09:20 PM
09/16/10 09:20 PM
|
Joined: Dec 2008
Posts: 90 Chandler, AZ
cirrusaero
OP
member
|
OP
member
Joined: Dec 2008
Posts: 90
Chandler, AZ
|
OK, I know a few good builders on the east coast but I want to find a Quality shop within a 5 hours drive of Phoenix, AZ to build up an aluminum 605ci carburated street/strip Hemi.
Anyone have a trusted shop?? If you could please respond with a contact name/number and if you had any personal experience with them.
Thanks in advance.
68 Charger 605 Hemi, Keisler 5spd, Pro-touring 66 Coronet 2dr post 66 Satellite
|
|
|
Re: Recommend a Hemi builder in the Southwest??
[Re: cirrusaero]
#803440
09/17/10 01:08 AM
09/17/10 01:08 AM
|
Joined: Dec 2004
Posts: 1,717 Rancho Cucamonga, Calif.
PUNK
top fuel
|
top fuel
Joined: Dec 2004
Posts: 1,717
Rancho Cucamonga, Calif.
|
Bob Mazzolini Racing. He has a SS/AH car and has built ALOT of HEMIs. He just finished a 604" Stage V HEMI for a customer. World Iron block, Callies Magnum XL 4.75 stroke crank, Carrillo H-beam rods and CP custom pistons using Stage V engineering heads. Nice piece! 951-787-8783.
10.53 @ 125mph. 1.37 60 foot. Caltracs and Monoleafs, AFCO shocks.
Heads by INDIO MOTOR MACHINE; IMM. CP Pistons, PC Carbs.
|
|
|
Re: Recommend a Hemi builder in the Southwest??
[Re: PUNK]
#803441
09/17/10 01:16 AM
09/17/10 01:16 AM
|
Joined: Dec 2004
Posts: 1,717 Rancho Cucamonga, Calif.
PUNK
top fuel
|
top fuel
Joined: Dec 2004
Posts: 1,717
Rancho Cucamonga, Calif.
|
There is also CFO, however, im not sure of there number. I just found CFOs number. If this is current anyhow. 6619423364. They build some serious stuff as well.
Last edited by PUNK; 09/17/10 01:20 AM.
10.53 @ 125mph. 1.37 60 foot. Caltracs and Monoleafs, AFCO shocks.
Heads by INDIO MOTOR MACHINE; IMM. CP Pistons, PC Carbs.
|
|
|
Re: Recommend a Hemi builder in the Southwest??
[Re: PUNK]
#803443
09/17/10 02:17 AM
09/17/10 02:17 AM
|
Joined: May 2003
Posts: 13,202 aZLiViN
J_BODY
I Live Here
|
I Live Here
Joined: May 2003
Posts: 13,202
aZLiViN
|
Quote:
There is also CFO, however, im not sure of there number. I just found CFOs number. If this is current anyhow. 6619423364. They build some serious stuff as well.
Didn't Eric at CFO work on Mark Vierra's SS/AH engine?
|
|
|
Re: Recommend a Hemi builder in the Southwest??
[Re: cirrusaero]
#803444
09/17/10 12:48 PM
09/17/10 12:48 PM
|
Joined: Dec 2008
Posts: 90 Chandler, AZ
cirrusaero
OP
member
|
OP
member
Joined: Dec 2008
Posts: 90
Chandler, AZ
|
Anyone have any experience with Ricky Watters Race engines www.rwrengines.com or Speed O motive www.speedomotive.com I spoke with both shops in the last few days but I'm still undecided. I had forgotten about Dennis Maurer, his shop is walking distance from mine but I ran into him years ago at his shop looking for headers and he was clearly a busy man with no time for a naive smart ass such as me. I may try to go over there and see if he can build what I'm looking for.
68 Charger 605 Hemi, Keisler 5spd, Pro-touring 66 Coronet 2dr post 66 Satellite
|
|
|
Re: Recommend a Hemi builder in the Southwest??
[Re: cirrusaero]
#803445
09/17/10 04:50 PM
09/17/10 04:50 PM
|
Joined: Jan 2003
Posts: 554 Mesa , Az
Jambbii
mopar
|
mopar
Joined: Jan 2003
Posts: 554
Mesa , Az
|
I have heard some good things about Dennis. Let us know what you decide. My neighbor works on top alky team and I will probably have him help me out when the time comes.
Josh
70 Challenger 1960 Town Wagon P Pump 24v cummins project 06 Mega 3500 Drw 2wd 12 Durango R/T 18 Power Wagon 67 A100
|
|
|
Re: Recommend a Hemi builder in the Southwest??
[Re: Jambbii]
#803446
09/17/10 05:48 PM
09/17/10 05:48 PM
|
Joined: Nov 2003
Posts: 6,293 Rock Springs
Bob_Coomer
master
|
master
Joined: Nov 2003
Posts: 6,293
Rock Springs
|
With all the money your going to have in this engine, why let a thing like milage be a factor. Where is Rich Nebal... He was a part of Mopar engines West, has a new Hemi book out, and seems like a nice guy.. Think his user name is Mopar Rich https://board.moparts.org/ubbthreads/show...eads&page=1
Last edited by Bob_Coomer; 09/17/10 07:44 PM.
[color:"red"]65 Hemi Belvedere coming soon [/color] [color:"#00FF00"]557" Indy engine 1.07 60ft 144mph in the 8th 2100 lbs package [/color]
|
|
|
Re: Recommend a Hemi builder in the Southwest??
[Re: Bob_Coomer]
#803447
09/17/10 07:23 PM
09/17/10 07:23 PM
|
Joined: Dec 2004
Posts: 1,717 Rancho Cucamonga, Calif.
PUNK
top fuel
|
top fuel
Joined: Dec 2004
Posts: 1,717
Rancho Cucamonga, Calif.
|
Rich would do a great job!!!
10.53 @ 125mph. 1.37 60 foot. Caltracs and Monoleafs, AFCO shocks.
Heads by INDIO MOTOR MACHINE; IMM. CP Pistons, PC Carbs.
|
|
|
Re: Recommend a Hemi builder in the Southwest??
[Re: RodStRace]
#803450
09/17/10 10:28 PM
09/17/10 10:28 PM
|
Joined: Dec 2006
Posts: 3,667 Arizona
Chris'sBarracuda
master
|
master
Joined: Dec 2006
Posts: 3,667
Arizona
|
Craig Eaton.. Remember him.. Pro Stock Dakota.. Builds Comp Engines.. Very fast ones. Loved his Baretta or Lumina, (chevys all look alike) with the small block Mopar in it.. Kicking Azz.. EATON ENTERPRISES LLC 23602 NORTH 35TH DRIVE GLENDALE, AZ 85310 623-780-8778 Chris..
|
|
|
Re: Recommend a Hemi builder in the Southwest??
[Re: RodStRace]
#803454
09/18/10 05:23 PM
09/18/10 05:23 PM
|
Joined: Jan 2003
Posts: 75,088 A Banana Republic near you.
JohnRR
I Win
|
I Win
Joined: Jan 2003
Posts: 75,088
A Banana Republic near you.
|
Quote:
Opinions are hit or miss on speedomotive. There is NO way I'd hand over hemi parts unless the rep was all good.
With what I have seen posted on speedo I wouldn't have them do a 5hp briggs
|
|
|
|
|