|
Re: oil and temp send unit
[Re: mopar70charger]
#767720
08/07/10 04:58 PM
08/07/10 04:58 PM
|
Joined: Jan 2003
Posts: 21,065 Niles , Ohio
therocks
oh wait.but hey.lets see.oh yeah.
|
oh wait.but hey.lets see.oh yeah.
Joined: Jan 2003
Posts: 21,065
Niles , Ohio
|
BBs used two oil switches one gauge the canister and small light.The temp sender they had 3 for sure.One small for gauge and a large one light.I had an Imperial that had one that had 2 blades sticking up.All the senders have the same thread size.Temp sender Ive seen different size holes on the pump housing.Is this a motor home block?They might be different.My Imperial had signal sentry that had a sender for oil on the passanger side of block also.Rocky
Chrysler Firepower
|
|
|
Re: oil and temp send unit
[Re: mopar70charger]
#767722
08/07/10 07:31 PM
08/07/10 07:31 PM
|
Joined: Jan 2003
Posts: 21,065 Niles , Ohio
therocks
oh wait.but hey.lets see.oh yeah.
|
oh wait.but hey.lets see.oh yeah.
Joined: Jan 2003
Posts: 21,065
Niles , Ohio
|
The op switch like I said goes directly in the block and there are only 2 and they all have the same thread size.Make sure someone didnt screw an adapter for a mechanical gauge in the hole.The temp sender if you changed housimgs that might be the problem.What connector does your harness have?A lot of the housings have a hole for the sender and a plug that is a different size on the other side.That way either sender fits.Rocky
Last edited by therocks; 08/07/10 07:33 PM.
Chrysler Firepower
|
|
|
Re: oil and temp send unit
[Re: bboogieart]
#767732
08/08/10 02:03 AM
08/08/10 02:03 AM
|
Joined: Jan 2008
Posts: 3,886 Lost and Spaced
bboogieart
master
|
master
Joined: Jan 2008
Posts: 3,886
Lost and Spaced
|
pic #5 the canister for the oil pressure gauge. It screws right in where the other sender goes. Same size threads. Man look at how old that box is. Hmmm wonder how long I had that on the shelf. Hope this helps.
|
|
|
|
|
|