help with copper headgaskets - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech help with copper headgaskets

Print Thread

help with copper headgaskets #753846 07/20/10 09:46 PM 07/20/10 09:46 PM
Joined: Feb 2010 Posts: 190 Winterpeg, Canada H hvyweight OP member
hvyweight OP member H Joined: Feb 2010 Posts: 190 Winterpeg, Canada	I have a B1MC 588 World alum engine and I am trying to source a copper head gasket .021 for 4.53 bore with the oring in the head measuring 4.80 on the outside diameter. I tried SCE website but can only find a 4.52 bore gasket. any ideas? This is a nitrous motor? Mike

Re: help with copper headgaskets [Re: hvyweight] #753847 07/20/10 10:05 PM 07/20/10 10:05 PM
Joined: Feb 2010 Posts: 190 Winterpeg, Canada H hvyweight OP member
hvyweight OP member H Joined: Feb 2010 Posts: 190 Winterpeg, Canada	no ideas?

Re: help with copper headgaskets [Re: hvyweight] #753848 07/21/10 12:03 AM 07/21/10 12:03 AM
Joined: Jun 2007 Posts: 2,646 Plymouth Meeting, PA bigtimeauto Trophy Winner
bigtimeauto Trophy Winner Joined: Jun 2007 Posts: 2,646 Plymouth Meeting, PA	I would call clark they should be able to make them for you. .021 thickness? How far down is that piston? Steel rod needs around .039 piston to head and aluminum rod around .020 more. BB, TT5,Procharged 3300lb Street Car 4.79/154

Re: help with copper headgaskets [Re: hvyweight] #753849 07/21/10 02:45 AM 07/21/10 02:45 AM
Joined: Aug 2003 Posts: 43,228 Bend,OR USA C Cab_Burge I Win
Cab_Burge I Win C Joined: Aug 2003 Posts: 43,228 Bend,OR USA	Call SCE direct, they have made more than one custom Hemi head gasket for me, give them all the info you can They specialise in race gaskets of all types Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)

Re: help with copper headgaskets [Re: bigtimeauto] #753850 07/22/10 04:42 PM 07/22/10 04:42 PM
Joined: Feb 2010 Posts: 190 Winterpeg, Canada H hvyweight OP member
hvyweight OP member H Joined: Feb 2010 Posts: 190 Winterpeg, Canada	The pistons is .010 in the hole. How far should the ID of the oring be to the gasket bore? The wire is protuding .010 out of the head. 6099566-101588236_fcdE5oaA.jpg (68 downloads)

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1