help with copper headgaskets

Print Thread

Re: help with copper headgaskets [Re: bigtimeauto] #753850 07/22/10 04:42 PM 07/22/10 04:42 PM
Joined: Feb 2010 Posts: 190 Winterpeg, Canada H hvyweight OP member
hvyweight OP member H Joined: Feb 2010 Posts: 190 Winterpeg, Canada	The pistons is .010 in the hole. How far should the ID of the oring be to the gasket bore? The wire is protuding .010 out of the head. 6099566-101588236_fcdE5oaA.jpg (68 downloads)

Entire Thread
Subject	Posted By	Posted
help with copper headgaskets	hvyweight	07/21/10 01:46 AM
Re: help with copper headgaskets	hvyweight	07/21/10 02:05 AM
Re: help with copper headgaskets	bigtimeauto	07/21/10 04:03 AM
Re: help with copper headgaskets	hvyweight	07/22/10 08:42 PM
Re: help with copper headgaskets	Cab_Burge	07/21/10 06:45 AM

Hop To