Moparts Main Index | READ - Info & Help Page | Moparts Sponsors | Tech Archive

Forums Calendar Active Threads Search Forum Help
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
quality of summit house brand parts?? #706336
05/24/10 09:46 AM 05/24/10 09:46 AM
Joined: Jan 2003
Posts: 5,875
communist bloc of new jersey
J
jamesc Offline OP
master
jamesc  Offline OP
master
J

Joined: Jan 2003
Posts: 5,875
communist bloc of new jersey
i'm going in circles about what to do for a bracket door car and am thinking hard about doing something with the 72 swinger i had originally intended for a street car. has anyone used the summit house brand aluminum radiator/shroud/electric fan setup and/or their electric water pump that goes in the stock housing? also wondering about their poly race seat setup? tnx
Re: quality of summit house brand parts?? [Re: jamesc] #706337
05/24/10 01:31 PM 05/24/10 01:31 PM
Joined: Jan 2003
Posts: 21,076
Niles , Ohio
T
therocks Offline
oh wait.but hey.lets see.oh yeah.
therocks  Offline
oh wait.but hey.lets see.oh yeah.
T

Joined: Jan 2003
Posts: 21,076
Niles , Ohio
We have the poly seats in 2 cars.Mine 4 years the kids 10 years.No problems with them.They arent for a 100 mile drive but we both street drive the cars and they arent too bad.Ive heard the Rads are decent.Never heard of any problems with them.Most of their parts are made by Major companies and just changed a bit and their name on it.Rocky

Chrysler Firepower
Re: quality of summit house brand parts?? [Re: therocks] #706338
05/24/10 01:41 PM 05/24/10 01:41 PM
Joined: Aug 2003
Posts: 3,095
Idaho
Runner Offline
master
Runner  Offline
master

Joined: Aug 2003
Posts: 3,095
Idaho
dont know about the fan and shroud, but i have the radiator in 2 diffeent cars and they work nice. my first aluminum radiator was a griffin and that piece of crap started leaking after a couple years of use. the summit radiator that replaced the griffin has been in the car for 5 years now. they are made by northern radiator.
Re: quality of summit house brand parts?? [Re: therocks] #706339
05/24/10 01:43 PM 05/24/10 01:43 PM
Joined: Feb 2006
Posts: 1,064
Tennessee
7
727builder Offline
super stock
727builder  Offline
super stock
7

Joined: Feb 2006
Posts: 1,064
Tennessee
Will never buy another skummit SB double roller timing chain. Dont know who makes them for them? But the last 2-3 i bought have been junk. More slack in the chain than the old chain.

What a voice!!!!

http://www.godvine.com/10-Year-Old-Boy-with-Autism-Sings-Open-the-Eyes-of-My-Heart-1041.html
Re: quality of summit house brand parts?? [Re: 727builder] #706340
05/24/10 02:02 PM 05/24/10 02:02 PM
Joined: Dec 2008
Posts: 136
CHANDLER, AZ
512 VALIANT Offline
member
512 VALIANT  Offline
member

Joined: Dec 2008
Posts: 136
CHANDLER, AZ
Dont know about Summit, but Jegs electric water pumps are good. This is the 1 I run.
http://www.jegs.com/i/JEGS/555/50930/10002/-1
Re: quality of summit house brand parts?? [Re: 512 VALIANT] #706341
05/24/10 03:01 PM 05/24/10 03:01 PM
Joined: Jan 2003
Posts: 5,875
communist bloc of new jersey
J
jamesc Offline OP
master
jamesc  Offline OP
master
J

Joined: Jan 2003
Posts: 5,875
communist bloc of new jersey
thanks, i was looking at that one too. $175 with the racer discount.
Re: quality of summit house brand parts?? [Re: therocks] #706342
05/24/10 03:15 PM 05/24/10 03:15 PM
Joined: Dec 2009
Posts: 1,074
detroit, mi
POS Dakota Offline
super stock
POS Dakota  Offline
super stock

Joined: Dec 2009
Posts: 1,074
detroit, mi
Quote:

We have the poly seats in 2 cars.Mine 4 years the kids 10 years.No problems with them.They arent for a 100 mile drive but we both street drive the cars and they arent too bad.Ive heard the Rads are decent.Never heard of any problems with them.Most of their parts are made by Major companies and just changed a bit and their name on it.Rocky



Exactly. I have a lot of jegs branded parts on the 2 smallblocks I am building. I really like them. I think the billet aluminum parts are csr possibly. If not they are identical. I have the throttle brackets, thermo housing, fittings, and all kinds of other stuff. I'm pleased with all of it too.

Re: quality of summit house brand parts?? [Re: jamesc] #706343
05/24/10 03:15 PM 05/24/10 03:15 PM
Joined: Jan 2003
Posts: 3,031
Erda, UT
67Charger Offline
master
67Charger  Offline
master

Joined: Jan 2003
Posts: 3,031
Erda, UT
I've been running the Summit electric w/p (CVR) and radiator (Howe Racing) with either 1 or 2 16" SPAL fans for 3+ years and am completely satisfied. I actually have some OVERcooling issues when at full speed, but a drilled T-stat (none in there at the moment) should solve it without dead-heading the pump.

11.33 @ 118.46 on motor
10.75 @ 125.35 w/ a little spray
Now, high Speed Open Road Racing - Silver State Classic Challenge, Nevada Open Road Challenge, Big Bend Open Road Race
Rocky Mountain Race Week 2020, 2022 2.0, Sick Week 2023
Re: quality of summit house brand parts?? [Re: jamesc] #706344
05/24/10 03:32 PM 05/24/10 03:32 PM
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY Offline
Master
MR_P_BODY  Offline
Master

Joined: Jun 2003
Posts: 52,972
Romeo MI
I've been happy with the Summit brand parts... I have
their poly seat and cover also... its been in there
for 12 years now and still fine... from time to time
they do change manufacturers on parts... they go by
the cheapest bid... so todays part could be different
from 1 year ago
Re: quality of summit house brand parts?? [Re: MR_P_BODY] #706345
05/24/10 08:10 PM 05/24/10 08:10 PM
Joined: Aug 2007
Posts: 998
Clinton Township, Michigan
D
Dartin Offline
super stock
Dartin  Offline
super stock
D

Joined: Aug 2007
Posts: 998
Clinton Township, Michigan
I've used their radiator and some hose fittings. No trouble from any of it.
Re: quality of summit house brand parts?? [Re: Dartin] #706346
05/24/10 08:55 PM 05/24/10 08:55 PM
Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
mopar65 Offline
master
mopar65  Offline
master

Joined: Jan 2004
Posts: 3,838
Central Missouri Fort Leonard...
I am also happy with my summit rand and summit electric water pump.thanks Mopar65

3520 pound race ready 1973 Street/Strip Dodge Dart - Stock stroke 440/727 10.49 @ 125.0 on 93 pump gas & ET Street Radials. More to come... ( SGT Miller) Proudly served 12 years in the US ARMY RESERVES support our troops
Re: quality of summit house brand parts?? [Re: mopar65] #706347
05/25/10 12:13 AM 05/25/10 12:13 AM
Joined: Sep 2004
Posts: 1,226
Cookeville
Chilort Offline
Will Work For Mopars
Chilort  Offline
Will Work For Mopars

Joined: Sep 2004
Posts: 1,226
Cookeville
Summit "brand" parts are nearly always made by someone else and then rebranded and boxed. That means you have to figure out who is making what for Summit and when to get a real accurate idea. Goo luck with that.
Re: quality of summit house brand parts?? [Re: Chilort] #706348
05/25/10 12:42 AM 05/25/10 12:42 AM
Joined: Jun 2005
Posts: 6,257
gulfport, ms, west mi
rowin4 Offline
master
rowin4  Offline
master

Joined: Jun 2005
Posts: 6,257
gulfport, ms, west mi
I noticed today that some of the Jegs brand parts were higher priced than the major brand. I don't shop summit but it's done by low bid. Who will sell there relabeled parts the cheeper than the next guy.


it's ok to butt heads, just don't do it with a butthead
Re: quality of summit house brand parts?? [Re: rowin4] #706349
05/25/10 03:12 AM 05/25/10 03:12 AM
Joined: Jul 2004
Posts: 4,384
Worst Weather USA
493_DART Offline
master
493_DART  Offline
master

Joined: Jul 2004
Posts: 4,384
Worst Weather USA
no probs with Summit branded parts in 6 years.
Re: quality of summit house brand parts?? [Re: 727builder] #706350
05/25/10 02:29 PM 05/25/10 02:29 PM
Joined: Jan 2003
Posts: 16,928
NC
440Jim Offline
I Live Here
440Jim  Offline
I Live Here

Joined: Jan 2003
Posts: 16,928
NC
Quote:

Will never buy another skummit SB double roller timing chain. Dont know who makes them for them? But the last 2-3 i bought have been junk. More slack in the chain than the old chain.

Interesting. I have two of the Mopar BB timing chain sets and they are great. Taught chain, 9 index keys, torrington bearing against the block, etc. Now I run a flat tappet cam, not a roller with 800 open pressure.

1993 Daytona, 5.50 at 130mph (1/8) 1.19 sixty ft (PG). Link to 572 B1 - Part 1
Re: quality of summit house brand parts?? [Re: 440Jim] #706351
05/25/10 03:10 PM 05/25/10 03:10 PM
Joined: Feb 2007
Posts: 5,080
organ
M
maximum entropy Offline
master
maximum entropy  Offline
master
M

Joined: Feb 2007
Posts: 5,080
organ
Quote:

Quote:

Will never buy another skummit SB double roller timing chain. Dont know who makes them for them? But the last 2-3 i bought have been junk. More slack in the chain than the old chain.

Interesting. I have two of the Mopar BB timing chain sets and they are great. Taught chain, 9 index keys, torrington bearing against the block, etc. Now I run a flat tappet cam, not a roller with 800 open pressure.

same upinhyuh. i was impressed with the quality and fit. i have punished the big block sets beyond description- no failures.

for what is the good life if not doing things thoughtfully?
Re: quality of summit house brand parts?? [Re: jamesc] #706352
05/25/10 03:13 PM 05/25/10 03:13 PM
Joined: Feb 2007
Posts: 5,080
organ
M
maximum entropy Offline
master
maximum entropy  Offline
master
M

Joined: Feb 2007
Posts: 5,080
organ
Quote:

i'm going in circles about what to do for a bracket door car and am thinking hard about doing something with the 72 swinger i had originally intended for a street car. has anyone used the summit house brand aluminum radiator/shroud/electric fan setup and/or their electric water pump that goes in the stock housing? also wondering about their poly race seat setup? tnx

i have the seats in my turd. they're fine. reasonably comfy, and still plenty solid after hundreds of thousands of runs and millions of miles. ok. maybe not that much. but a lot!

for what is the good life if not doing things thoughtfully?
Re: quality of summit house brand parts?? [Re: maximum entropy] #706353
05/25/10 04:09 PM 05/25/10 04:09 PM
Joined: Jan 2003
Posts: 1,412
Johnstown
69dart Offline
pro stock
69dart  Offline
pro stock

Joined: Jan 2003
Posts: 1,412
Johnstown
I picked up a really nice aluminum radiator for my challenger on ebay. It was direct factory replacement only aluminum. It was really nice and only around $150.

http://cgi.ebay.com/ebaymotors/Aluminum-...sQ5fAccessories

33 Plymouth Roadster - 383 - 5.90 1/8th 9.58 1/4
68 Dart - 340
66 Belvedere - 400

Windy Hollow Garage - https://www.youtube.com/@windyhollowgarage
Re: quality of summit house brand parts?? [Re: 440Jim] #706354
05/25/10 04:38 PM 05/25/10 04:38 PM
Joined: Jan 2003
Posts: 6,531
Jacksonville, FL
Chris2581 Offline
master
Chris2581  Offline
master

Joined: Jan 2003
Posts: 6,531
Jacksonville, FL
Quote:

Quote:

Will never buy another skummit SB double roller timing chain. Dont know who makes them for them? But the last 2-3 i bought have been junk. More slack in the chain than the old chain.

Interesting. I have two of the Mopar BB timing chain sets and they are great. Taught chain, 9 index keys, torrington bearing against the block, etc. Now I run a flat tappet cam, not a roller with 800 open pressure.



I bought the Summit chain set for my 440 build and it looks very much like the Rollmaster that is on the other engine...

Nautilus Racing-
We use Superformance gaskets and Turbo Action converters/products.
Re: quality of summit house brand parts?? [Re: Chilort] #706355
05/25/10 05:07 PM 05/25/10 05:07 PM
Joined: Mar 2008
Posts: 264
Westbury, NY
C
cowbay Offline
enthusiast
cowbay  Offline
enthusiast
C

Joined: Mar 2008
Posts: 264
Westbury, NY
Quote:

Summit "brand" parts are nearly always made by someone else and then rebranded and boxed. That means you have to figure out who is making what for Summit and when to get a real accurate idea. Goo luck with that.


I have some summit items over the years. I know from my experiance that they can not tell you exaclty who it is made by, but I have had some very good luck where the phone persons will tell me it is very similar to another part made by company X. Which is about as far as they can go in telling you who made the part. As a result I will have to say I had very good luck with Summit products all except for a tach, but they exchanged without question.

"Alcohol is for drinking, gas is for cleaning parts, and nitro is for racing!" original author unknown, used by Gene Adams and Don Garlits among others
Page 1 of 2 1 2

Moderated by  Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer 
Privacy Policy · Forum Rules · Mark All Read Contact Us · Moparts




Moparts Main Index | READ - Info & Help Page | Moparts Sponsors | Tech Archive


Powered by UBB.threads™ PHP Forum Software 7.7.1