4 bbl kickdown linkage and pivot on 904 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 4 bbl kickdown linkage and pivot on 904

Print Thread

4 bbl kickdown linkage and pivot on 904 #698231 05/15/10 12:46 AM 05/15/10 12:46 AM
Joined: Jan 2003 Posts: 4,518 Indiana MonGoo$e OP master
MonGoo$e OP master Joined: Jan 2003 Posts: 4,518 Indiana	I was mocking up the 4 bbl kickdown linkage from a 70's Aspen on my '73 903 transmission(originally 2 bbl) and I notice the pivot bolt.rod that screws into the case seemed to short to slide through the pivot bracket for the 4 bbl linkage. Are the 4bbl pieces longer for that or do I just happen to have a fitting that's to short? See pic if you are unsure what fitting I'm talking about 5983473-question.jpg (86 downloads) My YouTube Channel, "Hoosier Garage" https://www.youtube.com/HoosierGarage

Re: 4 bbl kickdown linkage and pivot on 904 [Re: MonGoo$e] #698232 05/15/10 05:59 AM 05/15/10 05:59 AM
Joined: Jan 2003 Posts: 4,153 Canada -- Posts: 4034 -Registe... 5 5thAve Doesn't care what this says anyway
5thAve Doesn't care what this says anyway 5 Joined: Jan 2003 Posts: 4,153 Canada -- Posts: 4034 -Registe...	You mean the triangle looking part that the rod goes thru is too wide to fit right? The only difference for 4 barrel is the rod at the top. Maybe the size of the rod or the linkage part changed at some point.

Re: 4 bbl kickdown linkage and pivot on 904 [Re: 5thAve] #698233 05/15/10 10:28 AM 05/15/10 10:28 AM
Joined: Mar 2003 Posts: 5,193 NEW JERSEY AARCONV master
AARCONV master Joined: Mar 2003 Posts: 5,193 NEW JERSEY	that bolt might be different between 904 and 727...

Re: 4 bbl kickdown linkage and pivot on 904 [Re: MonGoo$e] #698234 05/15/10 06:00 PM 05/15/10 06:00 PM
Joined: Jan 2003 Posts: 25,866 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,866 Rio Linda, CA	The pivot stud is the same for 727 and 904 in a given year but did change with the years; '70 and earlier is different from '71-on. The INTERNET, the MISinformation superhighway

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1