Previous Thread
Next Thread
Print Thread
Page 2 of 2 1 2
Re: CAB wins! And my dart went straight. [Re: Cab_Burge] #673812
04/19/10 09:23 AM
04/19/10 09:23 AM
Joined: Jun 2003
Posts: 52,972
Romeo MI
MR_P_BODY Offline
Master
MR_P_BODY  Offline
Master

Joined: Jun 2003
Posts: 52,972
Romeo MI
Congrats to both of you... nice job on the win CAB

Re: CAB wins! And my dart went straight. [Re: Cab_Burge] #673813
04/19/10 09:23 AM
04/19/10 09:23 AM
Joined: Oct 2004
Posts: 8,165
Left Coast
B
BobR Offline
master
BobR  Offline
master
B

Joined: Oct 2004
Posts: 8,165
Left Coast
"figure out exactly where the pulsating vibration from the brakes is coming from"

Almost always a warped rotor or a hard spot.

Re: CAB wins! And my dart went straight. [Re: BobR] #673814
04/19/10 10:04 AM
04/19/10 10:04 AM
Joined: Jan 2003
Posts: 3,616
Riverside, Ca
G
G_bob Offline
master
G_bob  Offline
master
G

Joined: Jan 2003
Posts: 3,616
Riverside, Ca
Congrats Cab!

Re: CAB wins! And my dart went straight. [Re: BobR] #673815
04/19/10 02:36 PM
04/19/10 02:36 PM
Joined: Jun 2004
Posts: 1,226
Peoples republic of clackamas ...
A
atoetly Offline OP
pro stock
atoetly  Offline OP
pro stock
A

Joined: Jun 2004
Posts: 1,226
Peoples republic of clackamas ...
Quote:

"figure out exactly where the pulsating vibration from the brakes is coming from"

Almost always a warped rotor or a hard spot.




Jacked it up yesterday and put a dial indicator on both rotors. Left rotor had .005 run out Right rotor had .014 and was all over the place. This is a wilwood kit with non-vented rotors. May have to use the vented units?

Re: CAB wins! And my dart went straight. [Re: rickstershemi] #673816
04/19/10 04:04 PM
04/19/10 04:04 PM
Joined: Jan 2003
Posts: 32,394
Q
Quicktree Offline
I Win
Quicktree  Offline
I Win
Q

Joined: Jan 2003
Posts: 32,394
congrats Cab good job.

Re: CAB wins! And my dart went straight. [Re: Quicktree] #673817
04/19/10 07:25 PM
04/19/10 07:25 PM
Joined: Feb 2006
Posts: 146
Wis.
R
rlm2268 Offline
member
rlm2268  Offline
member
R

Joined: Feb 2006
Posts: 146
Wis.
congrat's Cab, way to go

Re: CAB wins! And my dart went straight. [Re: atoetly] #673818
04/19/10 08:38 PM
04/19/10 08:38 PM
Joined: Oct 2009
Posts: 1,288
Oregon
sg66mopar Offline
pro stock
sg66mopar  Offline
pro stock

Joined: Oct 2009
Posts: 1,288
Oregon
Quote:

Quote:

"figure out exactly where the pulsating vibration from the brakes is coming from"

Almost always a warped rotor or a hard spot.




Jacked it up yesterday and put a dial indicator on both rotors. Left rotor had .005 run out Right rotor had .014 and was all over the place. This is a wilwood kit with non-vented rotors. May have to use the vented units?




Had that problem when we first put the Wilwoods on the front. They warped like crazy first time out. The kit came with solid rotors they called 5/16 but they actually measured .300. After much "persuasion" they were convinced to send me 3/8" inch rotors (which actually measured .355) and a template so I could drill them myself.

After about 1000 passes they're still OK.

BTW, .014 is WAY too much.

Re: CAB wins! And my dart went straight. [Re: Cab_Burge] #673819
04/19/10 10:54 PM
04/19/10 10:54 PM
Joined: Dec 2003
Posts: 576
Bend, Oregon
6
67cuda340 Offline
super street
67cuda340  Offline
super street
6

Joined: Dec 2003
Posts: 576
Bend, Oregon
Way to go Cab.
The Old Fart still has it!!
See you at the track


1973 Dodge Dart Sport 360 Drag radials 12.30 1/4 mile 7.82 1/8 mile
Re: CAB wins! And my dart went straight. [Re: sg66mopar] #673820
04/20/10 12:23 AM
04/20/10 12:23 AM
Joined: Aug 2003
Posts: 43,228
Bend,OR USA
C
Cab_Burge Offline
I Win
Cab_Burge  Offline
I Win
C

Joined: Aug 2003
Posts: 43,228
Bend,OR USA
Quote:

Quote:

Quote:





BTW, .014 is WAY too much.


Allen, you could try havig them turned one time to straighten them out and see how long they hold up this time If they warp again right away then switch to the thicker ones


Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
Re: CAB wins! And my dart went straight. [Re: Cab_Burge] #673821
04/20/10 08:19 AM
04/20/10 08:19 AM
Joined: Sep 2005
Posts: 1,328
St. Louis, MO
mopardamo Offline
pro stock
mopardamo  Offline
pro stock

Joined: Sep 2005
Posts: 1,328
St. Louis, MO
Hello,

Great win Cab!
aloetly sounds like it is on target for some consistency. Good news this year I hope.

Damon

Re: CAB wins! And my dart went straight. [Re: mopardamo] #673822
04/20/10 08:58 AM
04/20/10 08:58 AM
Joined: Jan 2007
Posts: 3,695
nc
E
emarine01 Offline
master
emarine01  Offline
master
E

Joined: Jan 2007
Posts: 3,695
nc

Re: CAB wins! And my dart went straight. [Re: emarine01] #673823
04/20/10 10:06 AM
04/20/10 10:06 AM
Joined: Dec 2007
Posts: 154
Joplin, Missouri
M
Mac's Hemi 64 Offline
member
Mac's Hemi 64  Offline
member
M

Joined: Dec 2007
Posts: 154
Joplin, Missouri
Great job Cab. Maybe you can fly in and drive my junk. You have helped me with every thing else!

Page 2 of 2 1 2






Powered by UBB.threads™ PHP Forum Software 7.7.1