Do you guys remember who made these, and better yet where to find them? I had a set on my old W2 heads, and sold them with the heads, DUMB ME!!

Any help...

Kasey

Hedman makes them.

RT66JIM,

Do ya by chance have a part number? I have been digging through the headman web site, cant find them.

Kasey

Is it this

hedman 10220

http://www.summitracing.com/parts/HED-10220

Kasey

no those are the inner flanges for the econo heads with the narrower bolt pattern..

W2 narrow heads (cc 4 in.). D-port.

Still have the D port shape which is a W2 exhaust port.

My heads are the Brodix heads with the stock 4" cc bolt pattern, I need to go from the stock to the W2/W5 header pattern so I need to make an adapter to go from narrow cc to the wide cc.

The Brodix head uses the D port just like the W2 exhaust.

Kasey

My Headmans came with adapter plates for W-2 to 4 bolt header flange. I believe I still have one if you need it. If it's the right one at least you would have a template. My headers are 2" A-Body Headmans that have 1 tube thru the inner fender.
Doug

I might have some of these in the garage. I bought them from a member a few years back and never used them. I will get back with you.

Great guys!

If ya want to sell them, Ill buy them from ya. I would really like that.

Kasey

i have a set of 1 7/8 hedman header i would like to use on standard heads...

could someone make them ?

Well 70aar...

I made some adapters out of aluminum, and I could make a set for ya out of either aluminum or steel. Just get me a paper, or cardboard template of both header flanges. Its a lot of work, and I know they were made for my head set up otherwise Ill just make my own if I cant get a hold of a set.

Kasey

My 2" are on standard heads. Made the plates out of 5/16" steel. Traced both sets of gaskets for hole locations and milled the exhaust port holes. Drilled and tapped the header holes. Mounted the plates to the heads with tapered 45 degree allen head bolts. Been on the car 20 years.
Doug

If I cant get some already made, thats what Im gonna do.

I had some. Dont remember if i sold them with the heads or not. Can check if you still need some? Carl

Let me go out in the garage and look for them.

BRB

Will these do you any good? I Ran these back in 1985. Man i'm getting old.

Were those standard to W2, I cant tell off the picture?

Thats what I need is the Standard to W2

If so How much?

PM Me if ya would.

Thanks

Kasey

here is a set that I made for a brodix small block head there are aluminum adaptor plates making it into a sthal kind of pattern

No frills, Do ya have any more pictures of those? Im in the process of buying a set of W5 TTIs, and Thats exactly what Im needing. My brodix heads like yours have standars spread, and I need to do Exactly what ya have there.

Thanks by the way.

Kasey