stage V hemi heads - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech stage V hemi heads

Print Thread

stage V hemi heads #664287 04/08/10 09:12 AM 04/08/10 09:12 AM
Joined: Jan 2005 Posts: 1,466 malvern, ohio 3 3ddart OP pro stock
3ddart OP pro stock 3 Joined: Jan 2005 Posts: 1,466 malvern, ohio	some of you may have missed the posts on here by torkrules (john) and myself about the issues with mp aluminum hemi heads and this is what this ? is related to. if i'm going to switch to the stage v heads, which 1s do i want (for an easy conversion) and who sells them. as always thanks for your help! dave

Re: stage V hemi heads [Re: 3ddart] #664288 04/08/10 09:49 AM 04/08/10 09:49 AM
Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky. Hemi Allstate master
Hemi Allstate master Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky.	You want the Stage V replacement heads. http://stores.casselent.com/Detail.bok?no=31 Mark 1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019

Post deleted by Defbob [Re: Hemi Allstate] #664289 04/08/10 10:18 AM 04/08/10 10:18 AM
A Anonymous Unregistered
Anonymous Unregistered A

Re: stage V hemi heads #664290 04/08/10 10:29 AM 04/08/10 10:29 AM
Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky. Hemi Allstate master
Hemi Allstate master Joined: Mar 2006 Posts: 2,675 Mt. Eden Ky.	Quote: I would also check here for members that sell them all done. the above link will have box stock only. a decent clean up is going to be needed I only used the link because of the description and the picture. I don't know what members here sell Stage V heads. I have bought from Rick Cassel though and he is easy to deal with,and took care of a small problem for me without hesitation. Mark 1996 Ram 1500 Sport 1968 road runner 1952 Sears Allstate licensed, pump gas, Hemi 5.98 @ 115.73 1.33 60 ft. The best is yet to come. Painless Performance / Street RODDER magazine Top 100 for 2019

Re: stage V hemi heads [Re: Hemi Allstate] #664291 04/08/10 11:47 AM 04/08/10 11:47 AM
Joined: Jun 2004 Posts: 674 Ripley B BryanRad mopar
BryanRad mopar B Joined: Jun 2004 Posts: 674 Ripley	I would highly recommend Rick Cassel though to purchase from if you have someone to do the necessary assembly/clean up work. Purchased several things from him myself.

Re: stage V hemi heads [Re: BryanRad] #664292 04/08/10 12:15 PM 04/08/10 12:15 PM
Joined: May 2004 Posts: 12,387 Taxes & Virus's R-US, NY Dragula I Live Here
Dragula I Live Here Joined: May 2004 Posts: 12,387 Taxes & Virus's R-US, NY	For the higher hp applications, I recomend the ones that have the exhaust valve rotated 2* for the larger valves and higher flow. I didn't see a part number for that one under the link, but maybe the stock replacement ones flow enough for your needs. And yes, buy them from an engine builder. It will save you some headaches later. '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: stage V hemi heads [Re: 3ddart] #664293 04/08/10 12:49 PM 04/08/10 12:49 PM
Joined: Nov 2004 Posts: 420 P PasiR mopar
PasiR mopar P Joined: Nov 2004 Posts: 420	Contact Tim Banning at FHO.

Re: stage V hemi heads [Re: Dragula] #664294 04/08/10 12:50 PM 04/08/10 12:50 PM
Joined: Jun 2004 Posts: 674 Ripley B BryanRad mopar
BryanRad mopar B Joined: Jun 2004 Posts: 674 Ripley	I dont understand the necessity to buy them from an engine builder, if you buy them from Rick and send them to Jeff @ Modern or take your pick of the other good head guys, what the heck matters where you buy them.

Re: stage V hemi heads [Re: 3ddart] #664295 04/08/10 12:51 PM 04/08/10 12:51 PM
Joined: Nov 2003 Posts: 2,715 closer to Canadian beer! torkrules I'm neurotic
torkrules I'm neurotic Joined: Nov 2003 Posts: 2,715 closer to Canadian beer!	Quote: some of you may have missed the posts on here by torkrules (john) and myself about the issues with mp aluminum hemi heads and this is what this ? is related to. if i'm going to switch to the stage v heads, which 1s do i want (for an easy conversion) and who sells them. as always thanks for your help! dave Dave, If you want direct bolt ons you want the replacement heads. The Millennium heads are a little more exotic and for larger displacement engines. They also move the exhaust ports up which might cause fit problems in the car(you would need custom headers). If you want to go this route, Tim Banning at FHO is a very good source. He buys the heads raw and builds around them. I bought a set from him. They are a bit overkill for my use (He had them already built, just had to swap my valve springs. CNC ported and 2.30 intake valves) I had to do some strategic grinding around the top of cylinder to make sure those bigger valves cleared (I have a 4.255 bore. I wouldn't have to do this with a larger bore or the standard 2.25 valve). FWIW, the Edelbrock heads appear to be a good alternative. I haven't heard anything bad about them.

Re: stage V hemi heads [Re: 3ddart] #664296 04/08/10 05:40 PM 04/08/10 05:40 PM
Joined: Dec 2004 Posts: 1,717 Rancho Cucamonga, Calif. P PUNK top fuel
PUNK top fuel P Joined: Dec 2004 Posts: 1,717 Rancho Cucamonga, Calif.	I was just at Bob Mazzolini Racing in Riverside Calif. and he has a set of the Stage V Engineering heads on the shelf. They have already had the necessary valve job and blending along with port cleanup done. They are nice heads. The Stage V replacement heads are what you are looking for. www.bobmazzoliniracing.com 10.53 @ 125mph. 1.37 60 foot. Caltracs and Monoleafs, AFCO shocks. Heads by INDIO MOTOR MACHINE; IMM. CP Pistons, PC Carbs.

Re: stage V hemi heads [Re: PasiR] #664297 04/08/10 08:21 PM 04/08/10 08:21 PM
Joined: Sep 2003 Posts: 2,175 Duloc T The Shadow top fuel
The Shadow top fuel T Joined: Sep 2003 Posts: 2,175 Duloc	Quote: Contact Tim Banning at FHO. The replacement head is all you want.

Re: stage V hemi heads [Re: 3ddart] #664298 04/08/10 09:23 PM 04/08/10 09:23 PM
Joined: Jan 2003 Posts: 15,976 Chilliwack B.C. Canada R RUNCHARGER I Live Here
RUNCHARGER I Live Here R Joined: Jan 2003 Posts: 15,976 Chilliwack B.C. Canada	Tum Banning at FHO gets them in by the crate. I bought them from him as cheap as anywhere else, he worked them over CORRECTLY and shipped them to me. If you buy them from a builder like Tim you will save some shipping charges if nothing else. If there is any profit to be made from a part I would sooner see a guy that does great work get it as opposed to a simple part merchandiser. Sheldon

Re: stage V hemi heads [Re: RUNCHARGER] #664299 04/08/10 10:06 PM 04/08/10 10:06 PM
Joined: Jun 2004 Posts: 674 Ripley B BryanRad mopar
BryanRad mopar B Joined: Jun 2004 Posts: 674 Ripley	Not sure if Rick Cassel does the machine work to finish them up or not or can have them done. Regardless of that fact he seems to be a real straight shooter and has been very helpful for me. I actually bought my heads from Mike Cavalieri at hemipartsking. I would bet almost any Stage V dealer is going to be decent to work with, because Eric is probably as picky with choosing dealers as he is his production quality.

Re: stage V hemi heads [Re: RUNCHARGER] #664300 04/11/10 04:01 AM 04/11/10 04:01 AM
Joined: Feb 2003 Posts: 911 London, England mopar_mark super stock
mopar_mark super stock Joined: Feb 2003 Posts: 911 London, England	Quote: Tim Banning at FHO gets them in by the crate. I bought them from him as cheap as anywhere else, he worked them over CORRECTLY and shipped them to me. If you buy them from a builder like Tim you will save some shipping charges if nothing else. If there is any profit to be made from a part I would sooner see a guy that does great work get it as opposed to a simple part merchandiser. Sheldon I second Tim, great guy to do business with, would use him again without a hessitation

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1