Black, Chrome, dual snorkel, no snorkel, pie pan or decal. Photo would be great
That is 383 4bbl for 1967
Thanks for the help.

What model?

Does it make a difference?
I did not know there were that many options but lets say
B body Plymouth.

I have a 66 parts manual handy hence my asking the board about a 67. I'm showing two lids that are available for a 66 383 4 bbl car. One single snorkel and one dual snorkel. Of course if it was a CA car the lids contained the nipple. Same for B body and C body (If I am reading this right)
I'm looking for a 4 bbl carter 1967 383 C body air cleaner. Is it dual or single?
If I read Nicks site correctly I think its a dual but it is the sheet metal style snorkels. Not like the GTX style.
Right?

As far as I know, you would need one with round snorkels and the small cone. Or it could possibly have the large unsiclenced version. I don't have reference photos from survivor 383 HP b-bodies. If someone does, I'd be happy to add them to the site.

383 and 440 Super Commando's should have the dual snorkel style.

All others would be a single snorkel. '67's should have the flared cylinder style air snorkels (not the tapered ones).

Not all 4-bbl motors were Super Commando's. What is your exact application? (just saying 4-bbl B-Body is not specific enough)

Had a 67 rp23h satellite that IIRC, had 2 round snorkels air cleaner.

Reminds me when I worked in the parts dept!

Need the last eight of the vin. "yes I know you just want an air filter."

you might find your info here. I didn't look again to see if the answer is there but i suspect it might be.

http://www.nicksgarage.com/aircleaner.htm

I hope it helps.

My 383 4bbl. came with twin snorkel and black painted with pie plate. I have one for sale if needed.

I'm surprised no one has actually posted a pic. Here's what I'm using, replacing the single snorkel air cleaner that came on the 350hp 440 in my '67 300.

Note the smaller diameter dimple at the top, apparently that was standard for C-body applications from what I've seen.