Re: .960 or 1.00 torsion bars, any diffrence in handeling?
[Re: migsBIG]
#617912
02/19/10 02:45 PM
02/19/10 02:45 PM
|
Joined: Jan 2003
Posts: 27,548 So Cal
autoxcuda
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 27,548
So Cal
|
Yes, there will be a difference. The rate of a .96 is 135 lbs/in and a 1.00 is 160 lbs/in For comparison, a .86 /6 E-body bar is 90 lbs/in and a .92 Hemi bar is 115 lbs/in. Is it worth the $159 to buy 1.00" t-bars? That's tough to tell. Quote:
I have a set of new Mopar Performance .960 diam torsion bar and was wondering if it's worth stepping up the the Just Suspension 1.00 in diam bars they have advertised. I am into agressive street driving and would mind doing some other events that include some nice twist and turns. ....
|
|
|
Re: .960 or 1.00 torsion bars, any diffrence in handeling?
[Re: migsBIG]
#617914
02/19/10 03:06 PM
02/19/10 03:06 PM
|
Joined: Sep 2005
Posts: 6,516 Santa Cruz, California
Lefty
master
|
master
Joined: Sep 2005
Posts: 6,516
Santa Cruz, California
|
Quote:
I am into agressive street driving and would mind doing some other events that include some nice twist and turns.
I have 1" in the 66 Coronet and find the spring rate perfect for aggressive driving with the heavy 440 up front. They probably would feel stiffer in your car because of the lighter weight of the small block. I would start with the .960 and invest in a set of Hotchkiss sway bars. You could always swap in the bigger bars later.
|
|
|
Re: .960 or 1.00 torsion bars, any diffrence in handeling?
[Re: coronet1966d]
#617916
02/19/10 04:21 PM
02/19/10 04:21 PM
|
Joined: Jan 2003
Posts: 21,738 San Jose,CA
migsBIG
OP
YouTube is my go-to news source
|
OP
YouTube is my go-to news source
Joined: Jan 2003
Posts: 21,738
San Jose,CA
|
Quote:
go big or go home
I was going to go with a big block, but I have everything for the crate engine to just drop in. I will be doing more street driving, but would love to have the better handeling if it's noticeable. Just want it done right the first time so I won't have to redo it later.
|
|
|
Re: .960 or 1.00 torsion bars, any diffrence in handeling?
[Re: Skeptic]
#617920
02/19/10 11:01 PM
02/19/10 11:01 PM
|
Joined: Jun 2006
Posts: 699 Cooperstown, NY
jrlegacy23
mopar
|
mopar
Joined: Jun 2006
Posts: 699
Cooperstown, NY
|
If you go to just suspensions website, they still have them for $159. I do not know if the shipping is still free though.
[color:"#00FF00"]68 Fastback Barracuda with some stuff[/color]
|
|
|
Re: .960 or 1.00 torsion bars, any diffrence in handeling?
[Re: jrlegacy23]
#617922
02/20/10 01:25 PM
02/20/10 01:25 PM
|
Joined: Sep 2003
Posts: 1,168 Vancouver, WA
MoparMarq
super stock
|
super stock
Joined: Sep 2003
Posts: 1,168
Vancouver, WA
|
Quote:
If you go to just suspensions website, they still have them for $159. I do not know if the shipping is still free though.
Negative, Ghost Rider. Shipping was 30.25 to Seattle area. At 159 bucks, I couldn't pass it up either...
|
|
|
Re: .960 or 1.00 torsion bars, any diffrence in handeling?
[Re: ledft79]
#617924
02/20/10 04:24 PM
02/20/10 04:24 PM
|
Joined: Dec 2006
Posts: 414 northeast ohio
mkdart
mopar
|
mopar
Joined: Dec 2006
Posts: 414
northeast ohio
|
I'm glad I saw this post.I ordered a pair today,159.95 plus 21 bucks shipping to Ohio. Mike
Last edited by mkdart; 02/20/10 04:30 PM.
|
|
|
Re: .960 or 1.00 torsion bars, any diffrence in handeling?
[Re: mkdart]
#617926
02/21/10 06:44 PM
02/21/10 06:44 PM
|
Joined: Feb 2003
Posts: 1,679 Mansfield,Ohio
moparrulzzz
top fuel
|
top fuel
Joined: Feb 2003
Posts: 1,679
Mansfield,Ohio
|
Quote:
I'm glad I saw this post.I ordered a pair today,159.95 plus 21 bucks shipping to Ohio. Mike
Me too just ordered a set. Was getting ready to call Mancini tomorrow and get a set of .096. 180.33 to my door!!
|
|
|
Re: .960 or 1.00 torsion bars, any diffrence in handeling?
[Re: moparrulzzz]
#617927
02/22/10 06:42 AM
02/22/10 06:42 AM
|
Joined: Feb 2005
Posts: 283 N.E. England
Roppa440
super street
|
super street
Joined: Feb 2005
Posts: 283
N.E. England
|
The actual rate you get at the wheel from a torsion bar depends on how long your lower control arm is (B/E different to A) and how wide your wheels/tires are.
The longer the LCA and the wider the wheel, the lower the actual rating you get at the wheel.
Take that into account if you are trying to maintain a handling balance front to back.
In fact on the subject of balance, if you just fit stiffer front suspension without taking into consideration how stiff the rear is you will just end up with a car that understeers badly.
If you have understeer with a 0.96 bar you will make it worse going to a 1.00 bar. If you have oversteer with the 0.96 you would be right to try a 1.00 bar.
2002 Chevrolet Corvette 5.7 LS1
2011 Alpha Romeo Giulietta Veloce 1.6 JTD
Because running a Mopar in the UK is getting TOO expensive!!
|
|
|
Re: .960 or 1.00 torsion bars, any diffrence in handeling?
[Re: Roppa440]
#617928
02/22/10 07:44 AM
02/22/10 07:44 AM
|
Joined: Jan 2003
Posts: 27,548 So Cal
autoxcuda
Too Many Posts
|
Too Many Posts
Joined: Jan 2003
Posts: 27,548
So Cal
|
Quote:
The actual rate you get at the wheel from a torsion bar depends on how long your lower control arm is (B/E different to A) and how wide your wheels/tires are.
The longer the LCA and the wider the wheel, the lower the actual rating you get at the wheel.
Take that into account if you are trying to maintain a handling balance front to back.
In fact on the subject of balance, if you just fit stiffer front suspension without taking into consideration how stiff the rear is you will just end up with a car that understeers badly.
If you have understeer with a 0.96 bar you will make it worse going to a 1.00 bar. If you have oversteer with the 0.96 you would be right to try a 1.00 bar.
The rates I posted where for E/B body length LCA's.
I thought changes in wheel offset effect the spring rate rather than width. The normal of the forces on the contact patch is the center which is also the center of the rim width.
I think these cars have so much roll in stock form, a large contribution to the understeer is due to tire losing geometry. Reduce the roll and let the much better modern tires grip in the front. In stock form these cars are balanced. They understeer greatly unless there is enough power to thottle oversteer.
I went to 1" front T-bar in an A-body (stiffer than a B/E) with just the stock front sway bar. But I had 225/60/15 tires. Car definitely increased it's cornering power. It still understeer at the limit, but the limit was raised.
I then added a rear sway bar with same stock front sway bar and same 1" T-bar. A little oversteer. Next I put on a 1 1/8 front sway bar. Seemed pretty balanced. Now I'm trying a 1 1/4 front sway bar. Seems to understeer. But now I've got old hard tires. I could play with my adjustable front shock too... On and on it goes...
|
|
|
Re: .960 or 1.00 torsion bars, any diffrence in handeling?
[Re: autoxcuda]
#617929
02/22/10 10:03 AM
02/22/10 10:03 AM
|
Joined: Feb 2005
Posts: 283 N.E. England
Roppa440
super street
|
super street
Joined: Feb 2005
Posts: 283
N.E. England
|
I quite agree with you mate. Except that you have to consider the full length of the "lever" on the suspension. Which is the outer edge of the wheel.
I was just trying to keep it simple and thought it was worth mentioning because there are people out there that don't realise what effects they might end up causing.
A mate of mine with a small block fitted uprated springs and sway bar to the rear of his car and wondered why he was suddenly oversteering like crazy...
Last edited by Roppa440; 02/22/10 10:06 AM.
2002 Chevrolet Corvette 5.7 LS1
2011 Alpha Romeo Giulietta Veloce 1.6 JTD
Because running a Mopar in the UK is getting TOO expensive!!
|
|
|
Re: .960 or 1.00 torsion bars, any diffrence in handeling?
[Re: Roppa440]
#617930
02/22/10 10:50 AM
02/22/10 10:50 AM
|
Joined: Nov 2003
Posts: 3,010 GA
roadrunninMark
master
|
master
Joined: Nov 2003
Posts: 3,010
GA
|
Would you guys recommend the 1" bar for my instance, still building the car. This is what I have.
69 B body, 526" RB stroker, pro street (tubbed with 4 link rear) real wide rear tires, want to use adjustable UCAs up front, otherwise pretty much stock components for front suspension. I will use a descent size front tire, say a 7" front rim (15" diamter). Obviously it wont be a G machine, more for fun and car shows. I dont think I will drag race it either. Too much expense and time to have it go into the wall, but I would like to run it to see what it would do.
Thanks, Mark
|
|
|
|
|