440, 4.15 stroke, 10.5 to 1 comp, 650 solid roller. indy ez cnc'd, indy single plane, 2inch headers. Motor is in my strip only car, 4.56 gears, 3200lb. will a 1050 dominator be enough or will I need a 1150?

i am sure that is enough.will you be running a filter on it?

not when I make a pass

How many RPM will you be pulling... as the RPM goes
up so should the cfm

i've been trying to work out what size dommy i need on my junk but every manufacturer has a different idea & every calc for working it out gives me a different answer. was thinking of buying a king demon with the removable sleeves so if i get it wrong i can change relatively cheap.

We ran a air volume sensor to determine volumetric effeicncy on the 572 C.I. motor Rodney is testing on the dyno now, it has a custom built 1150 Dominator on it and the sensor says the motor is using around 1030 to 1040 CFM at and above 5000 RPM to 7000 RPM I used a Holley 9375 HP(nothing bigger) on a motor very much likes yours with ported 346 heads and it ran faster with every bigger carb. I tried on it A good 1050 will work very well, IMO